1-10 Gigabit Ethernet/82543 PMC Installation and Use
Before You Install or Remove a Board
1
Figure 1-2. Injector/Ejector Lever Types
Each lever type has a latching mechanism to prevent the lever from being
opened accidentally. You must press the lever release before you can open
the lever. Never force the lever. If the lever does not open easily, you may
not have pressed firmly enough on the release. If the lever does not close
easily, the board may not be properly seated in the chassis.
To open a lever, press the release and move the lever outward away from
the faceplate.
To close a lever, move the lever inward toward the faceplate until the latch
engages.
Verif y Slo t Usa ge!
Caution
Prevent possible damage to module components by verifying the proper
slot usage for your configuration.
Capability glyphs provide visual indication of backplane connector and
board capability. Capability glyphs are:
(Triangle) for System Slot
(Circle) for Peripheral Slots