112
Note: While in the message center, you can enter a
Call Back number at any time by using the keypad,
and then pressing S to place the call.
Locking and Unlocking a Message
You can lock important messages to ensure their
safekeeping for later review. A locked message
cannot be deleted until the message is unlocked.
Press f 5, to toggle the current
message between locked and unlocked.
Msg Locked is displayed when a message is
locked.
Note: If your message memory is full and a new
message is received, the oldest unlocked message
that has been read is deleted.
Clearing Messages

Clearing the Current Message

1. Press c when the message you want to
erase is on the display.
You will see Clear Message?, where the
number of the message you will clear is
shown in the upper right portion of the
display.
2. Press = or s to clear the message.
You will see Message Cleared.
or
Press e or any other key if you do not wish
to clear the message. You will see Msg NOT
Cleared.
Note: You must unlock a locked message before
you can clear it. For more information, see “Locking
and Unlocking a Message” above.
TDMA.book Page 112 Tuesday, November 2, 1999 9:54 AM