78
Selecting Call Alert Type
Shortcut:
Press f
8 to toggle
the VibraCall®
Alert function
on and off.
Using this feature, you can choose to be alerted to
incoming calls using the vibrating alert, the ringer,
both, or neither. Ring Only is the default.
In particular, the VibraCall® Alert vibrating alert is
ideal for situations where ringing may not be
appropriate, or in noisy places where you might not
hear the ringer.
When both the ringer and vibrating alerts are
selected, the phone alerts you by vibrating for three
cycles and then ringing.
Notes:
•Although you set your call alert type below,
the selection is temporarily suppressed if
Pager Mode is enabled. See “Activating
Pager Mode” on page 96 for details.
•When your phone is connected to an external
power supply and you receive an incoming
call, your phone will ring, regardless of the
call alert setting.
To select an alert type, complete the following
steps:
1. Follow the steps in “Getting to Tone Controls”
above to select Call Alert Type.The display
shows your current alert type setting.

Getting to Tone Controls

1. Press f, then press = to enter the menu system.
2. Press > or < to scroll to Tone Control and press =
to select.
3. Press > or < to scroll to the following features, and press =
to
select.
TDMA.book Page 78 Tuesday, November 2, 1999 9:54 AM