Motorola CP125TM manual Scan

SCAN

Your radio is equipped with the Scan feature, allows you to monitor multiple channels and receive calls that are transmitted on them.

•The Gindicator appears on the LDC screen while in scan mode.

Two types of scan are supported:

•Normal Scan – searches all channels sequentially in the radio’s scan list.

Start	Ch. 2	Ch. 3
Ch. 1 Normal Scan
	Home	Ch. 4

•Priority Scan – allocates 50% of the scan- ning time to the Priority Channel (the first channel in the designated scan list).

Start

Ch. 2 Ch. 1 Ch. 3

Ch. 1 Channel 1 Prioritized		Ch. 1
Home	Ch. 4

During scan, when activity is detected that meets the unsquelch condition, the radio stops scanning and switches to that channel; the Gindicator and the channel number are displayed. When no activity is detected for a pre-set time, the radio resumes scanning.

If your radio has switched to a non-priority channel during Priority Scan, it still checks for activity on the priority channel. If activity is detected there, the radio switches to the priority channel.

The radio transmits on the Prime Channel, if the PTT button is pressed during scanning. If the radio has stopped scanning, and has changed to a particular channel, all transmit and receive activity is performed on that channel.

17

SCAN

English