Allegro_CID.book Page 15 Tuesday, January 15, 2008 3:07 PM
3.Press 
or 
to select "DIAL MODE" and press 
.
4.Press 
or 
to select "TONE" or "PULSE" and press 
.
Registering a new handset
When you register a new handset to your base, you will be asked to enter the base PIN code.
The
Each handset can only be registered to one base at a time. Before registering, make sure the new handset is fully charged and that you have the base and handset in front of you.
On the handset you want to register:
1.Press 
to access the main menu.
2.Press 
or 
to select "REGISTRATION" and press 
.
3.Press 
or 
to select your base number.
On your base:
4.Press and hold 
until you hear the registration tone. You are now in 'subscription mode'.
If the base already has the maximum number of handsets (5) registered to it, you will hear the reject tone and you will need to
See the next section for
5.Press 
.
6.Enter the base PIN code. The
7.Press 
.
You will hear a confirmation tone when registration is complete.
When in standby mode, the new handset number will be displayed.
The handset will automatically be allocated with the next available handset number.
If the registration fails, the handset display returns to the display of before the registration.
De-register a handset
If you have more than one handset registered to your base, you can
Before
1.On a handset not to be 
to access the main menu.
2.Press 
or 
until "BS SETTINGS" is displayed and press 
.
3.Press 
or 
to display "TERMINATE HS" and press 
.
4."PIN ?" is displayed. Enter your PIN code and press 
.
5.Press 
or 
to display the handset you want to
and press 
.
If the handset has been
Base PIN code
You need to enter the base PIN code when you are registering handsets. For security reasons you may wish to change the PIN code. You can choose a PIN code up to 4 digits long. If you reset the base from the handset, the base PIN code will be 0000.
English
15
