Motorola D200 manual Default settings, Selecting a base, Resetting your phone

English

16

Allegro_CID.book Page 16 Tuesday, January 15, 2008 3:07 PM

Always keep a record of your base PIN code. Note your PIN code and keep it in a safe place. If you change the PIN code you will need to use the new code for any handset registered to your base.

1.Press to access the main menu.

2.Press or to select "BS SETTINGS" and press .

3.Press or to select "MODIFY PIN" and press .

4.Enter the current PIN code using the number keypad .

5."NEW PIN" appears. Enter a new PIN code and press .

6."CONFIRM ?" appears. Re enter new PIN code. Press .

Selecting a base

You can register a handset to up to 4 bases, e.g. one at work and one at home, and switch between them. Once your handset is registered with other bases, you can specify the base you want to use.

1.Press to access the main menu.

2.Press or to select "HS SETTINGS". Press .

3.Press or to select "SELECT BASE". Press .

4.Press or to select the base number.

Press .

Resetting your phone

If you reset your phone, both the base and handset will return to their pre-set (default) settings. If you have more than one handset registered to your base and you complete the following procedure, only the handset you reset and the base will go back to the default settings.

For the base:

1.Press to access the main menu.

2.Press or to select "BS SETTINGS" and press .

3.Press or to select "BS DEFAULT" and press .

4."PIN ?" appears. Enter your PIN code. Press .

The base will reset and the handset will return to standby mode.

For the handset:

1.Press to access the main menu.

2.Press or to select "HS SETTINGS" and press .

3.Press or to select "HS DEFAULT" and press .

4."PIN ?" appears. Enter your PIN code. Press . The handset will reset and the handset will beep.

10. Default settings

Ringer Volume	2
Earpiece Volume	3
Speaker Volume	3
Base Ringer Type	1
Internal/External
Ringer Type	1
Alarm	OFF
Tone	Key Tone	ON
	Battery Low	ON
	Range Alarm	ON