Motorola DCH3416 Separable Security

4 DIAGNOSTICS

Separable Security

This diagnostic displays information on the inserted M-CARD and CableCARD Interface with the DCH.

Field	Description
CARD Interface	CableCARD Interface is a status indication of the interface between the Host
	and CableCARD. It will indicate “Good” if no errors are detected, “Error” if
	there is an error establishing the CableCARD interface, or “Unsupported
	CARD” if the inserted CableCARD is not an M-CARD.
CableCARD ID	The unique identifier provided by the CableCARD.
Host ID	The unique identifier in the Host Device Certificate.
Data ID	A value generated by the CableCARD for the Pairing report.
Validation	• UKNOWN if a Validation message was not received by the product.
	• VALID or INVALID as set by the Host Validation Message received
	from the headend.
	• BINDING if the CableCARD is busy with the binding authentication
	process.
	• NOT BOUND if Card validation status is not bound for CableCARD
	reasons.
	• HOST CERTIFICATE INVALID if the status is not bound because
	the Host Certificate was invalid.
	• HOST SIGN FAILED if status is not bound because of failure to
	verify Host’s SIGN.
	• AUTH KEY FAILED if status is not bound because of failure to
	match AuthKey from the Host Device.
	• FAILED if binding failed for other reasons.
Pairing Rpt Method	Set to “MMI” or “Reportback” as received by a message from the headed,
	or set to ‘Unknown’ if the headend message was not received.
MSO Phone Number	MSO Phone Number as configured at the headend.
	32