4 DIAGNOSTICS
Field | Description |
|
|
Content | The content record version number, displayed without leading zeros |
Record |
|
Ver. |
|
|
|
Encoder | Information about the analog encoder for the |
|
|
Number | Indicates the encoder number — 1 or 2 |
|
|
Type | Indicates the encoder type — Not Installed, MPEG2, Other, or Unknown |
|
|
Quality | Indicates the encoder quality setting (video bit rate) for analog services only, which may change at |
| any time through software: |
| • LOW1 — 1 Mbps |
| • LOW2 — 2 Mbps |
| • MEDIUM1 — 3 Mbps |
| • MEDIUM2 — 4 Mbps |
| • HIGH1 — 5 Mbps |
| • HIGH2 — 6 Mbps |
| • NOT AVAILABLE — the encoder is not enabled or configured |
|
|
Drive | The drive type — IDE (internal), 1394, USB (external), or NOT AVAILABLE (neither enabled nor |
| configured) |
|
|
Record | The remaining recording capacity, in bytes |
Capacity |
|
Remaining |
|
|
|
Number of | The number of internal and external hard drives, up to a maximum of 9 |
Installed |
|
Drives |
|
|
|
Drive | The identification number sequentially assigned to each installed drive and whether the drive is |
| Internal or External |
|
|
Model | The drive model number assigned at the factory |
Number |
|
|
|
Device ID | A text string of up to 20 characters that identifies the disk drive; “N/A” is displayed if the value is |
| invalid or cannot be retrieved |
|
|
Type | The drive type — IDE, 1394, USB, or Unkn(own) |
|
|
Total Size | The drive size in decimal GB. (1 decimal GB = 1x109 bytes. For example, 120 decimal GB = |
| 120x109 bytes.) |
|
|
System, | The space used and allocated in MB for each of the internal hard drive’s partitions — System, |
GPFS, DVR | GPFS, DVR Content, and DVR Index (1 binary MB = 220 bytes). “N/A” displays if the value is |
Content, | invalid or cannot be retrieved. |
and DVR |
|
Index |
|
|
|
State | The hard drive state: |
| • Standby — The hard drive is working normally, but is at rest (the State returns to Active |
| any time disc access is necessary). |
| • Active — The hard drive is accessing data. |
| • Failed — The hard drive hardware has failed. |
|
|
Temp (F) | For an internal hard drive only, its temperature in degrees F |
|
|
| 51 |