4 DIAGNOSTICS
Audio/Video Status
Audio/Video Status diagnostics display information regarding audio and video content and settings configured for the
AUDIO SPDIF | Indicates SPDIF Mode as set by application software. | |
|
|
|
| OSD Display | Description |
|
|
|
| N/A | Audio SPDIF mode is not applicable |
|
|
|
| IEC958PCM | PCM audio selected |
|
|
|
| Dolby Digital | For Dolby Digital selection, the following speaker selection is set: |
|
|
|
| 1/0 | right front or left front |
|
|
|
| 2/0 | right front and left front |
|
|
|
| 3/0 | right front and left front and center |
|
|
|
| 2/1 | right front and left front and (right rear or left rear) |
|
|
|
| 3/1 | right front and left front and center and (right rear or left rear) |
|
|
|
| 2/2 | right front and left front and right rear and left rear |
|
|
|
| 3/2 | right front and left front and center and right rear and left rear |
|
|
|
LFE: Low Frequency Effect | The LFE indicates if the nomenclature low frequency effects are available in | |
|
| the Dolby Digital audio stream as indicated if the “0.1” is present in the |
|
| Dolby Digital 5.1 nomenclature (for example, “Dolby Digital 5.1 surround”). |
|
| Valid values include: |
|
|
|
| OSD Display | Description |
|
|
|
| 0 | LFE is not available |
|
|
|
| 1 | LFE is available (for example, “Dolby Digital 5.1 surround”). |
|
|
|
Muting State and Method | The Audio and Video Mute Status indicates if the audio and/or video has | |
|
| been muted by the software. The audio mute is either “On” or “Off.” The |
|
| Video Mute describes the MPEG muting method selected by the software |
|
| and indicates if the output video is in the mute state by displaying “On” or |
|
| “Off,” followed by the mute method. Methods include: |
|
|
|
|
| 42 |