Turning Power On and Off, Changing Channels | Motorola DCT6400

OPERATION

OPERATION

Turning Power On and Off

Press POWER on the front panel to turn the DCT* on or off. When using the remote control, be sure it is in cable mode by pressing CABLE before pressing POWER.

Changing Channels

You can change channels in two ways:

•	Press CHANNEL	or	on the front panel of the DCT*, or
	press CHANNEL	or	on the remote control to step through the
	channel selection.
•	Enter the number of the channel you wish to view using the number
	keys on the remote control.

you adjust the volume,+–+the -volumescale is displayed on the screen. Press MUTE on the remote control to turn the sound off and on again.

Adjusting the Volume

Press VOLUME or on the remote control to adjust the volume. When

For best audio quality, use the remote control to set the DCT* to approximately ¾ of the maximum volume level and then adjust the audio levels on external devices such as your TV or A/V Receiver.

Interactive Program Guide

The interactive program guide displays information about TV programs and enables you to access features such as Parental Control or Pay-Per-View. Interactive program guides can vary with each cable service provider. Refer to the interactive program guide instruction manual for detailed instructions.

6

Image 13

Motorola DCT6400 Turning Power On and Off, Changing Channels, Adjusting the Volume, Interactive Program Guide, Operation

Contents

MSGS ON INFO MENU POWERRECORD REMOTE OPTION GUIDE SELEC T DO NOT REMOVE COVER OR BACK NO USER-SERVICEABLE PARTS INSIDE NOTE TO CATV SYSTEM INSTALLERREFER SERVICING TO QUALIFIED SERVICE PERSONNEL REPAIRS IMPORTANT SAFETY INSTRUCTIONS Page Declaration of Conformity Regulatory Information23 Battery usage 24 Heat SOFTWARE LICENSE You may Software LicenseYou may not Contact Us Canadian Compliance DCT6400 Series User Guide CONTENTS Troubleshooting Data FeaturesRecording Your Connections Data Devices INTRODUCTION CABLE FRONT PANELPass Card AC Switched Outlet BACK PANELY Pb Pr Adjusting the Volume Turning Power On and OffChanging Channels Interactive Program Guide DIGITAL VIDEO RECORDER DVR What is DVR? Record two programs from two different channels at the same time Simultaneously Record Two ShowsSimultaneously Record Two Shows and Watch a Recorded Program OPTIMIZING YOUR DCT* FOR HIGH DEFINITION TV Page User Settings DCT6400 Series User GuideIf you are not using an HDTV with the DCT*, selecting a blank. If this occurs, you can view the settings on the LED Sets the opacity of the closed captions foreground. Defaults to 480i, this setting defaults to OFF and cannot be changedprogramming to fill your widescreen display. Stretch can Turns closed captions off or on. The LED panel displays the DCT6400 Series User Guide ON-SCREEN GRAPHICS The YPbPr Output setting can be configured from the on-screen menu CONNECTING YOUR DCT Component video Y Pb Pr - HDTV and SDTV Video Connection OptionsS-Video - SDTV RF Input - SDTV V E N T I L A T E Important Safety Considerations DCT6400 Series CONNECTING YOUR DCT* TO A HDTV - VIDEO ONLYHDTV IEEE IEEE Connecting HDTV - Video Only Audio Optical connection connection CONNECTING YOUR DCT* TO A HDTV - AUDIO ONLYOptional INPUT Connecting HDTV - Audio Only Either / or CONNECTING YOUR DCT* TO AN A/V RECEIVER - AUDIO ONLYDCT6400 Series A/V receiver Optical OPTICAL SPDIF Connecting an A/V Receiver - Audio Only DCT6400 Series CONNECTING YOUR DCT* TO A STEREO TVStereo TV S-Video Connecting a Stereo TV Cable in CONNECTING YOUR DCT* TO A STEREO TV AND STEREO VCRStereo VCR Stereo TV Connecting a Stereo TV and Stereo VCR Stereo VCR CONNECTING YOUR DCT* TO AN A/V RECEIVER, TV, AND VCRStereo TV A/V receiver Connecting an A/V Receiver, TV, and VCR HDTV / SDTV RECORDING YOUR CONNECTIONSStereo receiver A/V receiver DATA DEVICES Data Features Problem TROUBLESHOOTINGPossible Solution Verify that the MUTE button on the DCT* or the remote on the TV screen There is no videoThere are no graphics, closed Wide screen TVs display 43 programs in this format There are black This may occur on a 43 TV if the 43 OVERRIDE setting