4 DIAGNOSTICS

Diagnostics are displayed on the on-screen display (OSD). They confirm proper installation, including:

•Checking error states and signal integrity.

•Identifying the cable terminal on the network.

•Verify communications with the headend. For the diagnostics described in this section:

•All indicators are in decimal notation, unless otherwise noted.

•All signal-level and quality indicators use a 1% to 100% scale, unless otherwise noted.

•All sample displays are illustrative; actual data may differ from the examples.

Using the Diagnostics

To use the diagnostics:

1.Ensure that the DCX3200 is installed with the Thin Client software and that it is connected to an AC outlet.

2.Ensure the set-top is powered on.

3.Press POWER on the remote control to put the set-top in stand=bay mode.

4.Within two (2) seconds press SELECT on the remote control to enable diagnostic mode.

5.The Diagnostics main menu is displayed on the OSD.

You can use the following keys to navigate the diagnostics menus:

•Press channel ▲, channel ▼, cursor ▲, or cursor ▼ to select d01 through E.

•Press cursor ◄, cursor ►, select or enter to execute the selected diagnostic.

•Select E from the main menu or press power to exit.

33