The center frequency of the channel to which the DOCSIS upstream channel receiver is tuned. It can be 5 to 42 MHz. If the value is invalid or cannot be retrieved, Carrier Lock is NO, or if DOCSIS is not enabled, N/A is displayed.
The DOCSIS upstream channel modulation: QPSK, QAM 8, QAM 16, QAM 32, QAM 64, or QAM 128. If the value is invalid or cannot be retrieved, or if DOCSIS is not enabled, N/A is displayed.
The upstream channel identifier 0 to 255. If the value is invalid or cannot be retrieved or DOCSIS is not enabled, N/A is displayed.
The upstream channel power level in dBmV. If the value is invalid or cannot be retrieved, or if DOCSIS is not enabled, 000 is displayed.
The upstream channel symbol rate in mega-symbols per second. If the value is invalid or cannot be retrieved, or if DOCSIS is not enabled, 0.000 is displayed.
Displays up to 32 MAC addresses learned by the DCX3200 cable modem, including the Set-Top MAC and future MAC addresses assigned by DSG, in hexadecimal format xx:xx:xx:xx:xx:xx on two screens if necessary. If the value is invalid or cannot be retrieved, or if DOCSIS is not enabled, no values are displayed.
60
4 DIAGNOSTICS
Field | Description |
| |
Mode | The DOCSIS downstream channel modulation: QAM 64 or QAM 256. If the |
| value is invalid or cannot be retrieved, Carrier Lock is NO, or if DOCSIS is |
| not enabled, 000 is displayed. |
| |
Power Level | The downstream channel power level in dBmV. If the value is invalid or |
| cannot be retrieved, Carrier Lock is NO, or if DOCSIS is not enabled, 000 is |
| displayed. |
| |
SNR | The estimated downstream channel carrier signal-to-noise ratio in the format |
| xx.x dB. It is the value reported as SNR in the MIB. If the value is invalid or |
| cannot be retrieved, Carrier Lock is NO, or if DOCSIS is not enabled, 00.0 is |
| displayed. |
| |
Upstream Channel (carries data from the set-top to the headend)
Frequency
Mode
Channel ID
Power Level
Symbol Rate
Known MAC
Addresses
