Motorola DCX3200 Purchase Status

4 DIAGNOSTICS

Purchase Status

This diagnostic displays the status of subscriber event purchases on the OSD. The information is updated each time this diagnostic is viewed:

The Purchase Status fields are:

Field	Description
Unsent	The number of purchases in the DCX remaining to be polled. It can be an
	integer from 0 to 63.
Unack	The number of reports that have not been acknowledged by the controller.
	It is an integer.
Last Seq Num	The last acknowledged sequence number of a purchase sent by the
	controller. It is a 16-bit, unsigned hexadecimal number.
Last RB Time	The last time the DCX3200 attempted to report back purchases to the
	controller, in GPS seconds.
IPPV Status	If IPPV is enabled, the IPPV status indicator is on. If IPPV is disabled, the
	IPPV status indicator is off.
Prep CMD	“Last Prepare for Poll Command” sequence number and time of the last
	prepare for poll request command that was sent by the controller. Note
	that each requesting process maintains an independent sequence of poll
	requests to uniquely identify the poll responses.
Prep ACK	“Last Prepare for Poll Acknowledge” sequence number and time of the
	last Report Purchase request sent by the controller.
Poll Request	Sequence number and time of the last send poll buffer command that was
	sent by the controller.
Poll	Sequence number and time of the last Poll Acknowledge message sent
Acknowledge	by the controller.
Stack Unit	Unit used in purchase processing.
Show Count	Count used in purchase processing.
	36