![](/images/new-backgrounds/1179722/17972237x1.webp)
19
Figure 2. Codeplug Editor
To modify configuration parameters use the MPS tool as the following:
•Click on Read from CPU to read the codeplug parameters. If your device is successfully read, you will see CPU parameters.
•Click on Save to file to backup the original codeplug data.
•Modify a parameter per your selection.
•Click on Write to CPU to program the device.
•If the device is successfully programmed, the following message appears.
CAUTION: Incorrect configuration can make the device inoperable. Please, make sure to acquire the appropriate codeplug. Always make a backup copy in case an error is made during the update.
Note: For details refer to Maintenance Programming Software User’s Manual.