34 MW800 CPU Owner’s Manual
To reinstall a program, from the Add/Remove Programs Properties window, click Install, and then follow the instructions on the screen.
Recovering the hard disk to factory contents from recovery CD (only for Windows 2000)
If your hard disk data is completely damaged and none of above procedures helps, you can recover the hard disk software image similar to the initial factory install with the recovery CD.
To recover the hard disk, do the following:
•Turn the CPU off.
•Connect USB
•Insert recovery CD into USB
•Turn on your computer.
•Watch the display carefully. When the
•Make your
•Follow the instructions on the screen:
Press the ‘ Y’ key when "Copy disk image from CD to hard disk. Continue?” appears on the screen.
Type the word "agree" and press Enter when "This will erase all data...
type agree to confirm this action" appears on the screen.
•Wait until copying is finished.
•Disconnect the USB device from the MW800 and reboot again
When the recovery process finishes, your computer will restart with the
Hard Drive Replacement
Replace the hard disk only if it needs to be repaired (if none of the aforementioned procedures are effective). Understand that the hard disk bay connector was not designed for frequent connections and could be damaged through improper use.