![](/images/new-backgrounds/1179722/179722113x1.webp)
57
Figure 17. Graphics Controller Properties (Embedded Driver)
Choose desired graphics mode by selecting the appropriate icon and then by selecting either the OK or Apply button. The following is available:
•Single Primary display only.
• Twin | Two displays with the same content and are driven by |
| same set of timings. Both displays should support the |
| same resolution and refresh rate. |
See the Intel Embedded Graphics Driver User's Guide for more information.
NOTES:
•It is recommended to disable touch screen of the secondary display in the Device Manager
•The Bluetooth module must be installed in the primary display.
•During the boot up (a time between powering the MW800 on and the operating system start) boot process will be seen on the primary display.