Removing The Belt Clip
1.Insert a pencil or equivalent size instrument between the inside of the belt clip and the metal clip assembly to hold the metal clip partially sprung (metal clip should be approximately parallel with the plastic portion of the belt clip).
EH |
| GM | 12/18/91 |
| O.K. AS IS | ( | ) | |
EDITOR | DATE | CHECKER | DATE | CORRECTED |
| ( | ) | |
JWB | 12/18/91 | SH | 12/13/91 | AS | O.K. AS MARKED | |||
MARKED |
|
|
|
| ||||
| LETTERING SIZE: |
| ISS. | REVISION | RLSE. | RLSE. | ||
| REQUIRES: |
| O |
| JWB | EH |
| |
|
|
|
|
| 12/18/9112/18/91 | |||
|
|
|
|
|
| |||
|
|
|
| A | Revise Belt Clip | JWB | EH |
|
|
|
|
| 5/27/93 5/27/93 |
2.Push the flat blade of a #2 slotted screwdriver (or like instrument) between the battery housing and the belt clip release tab.
3.While performing step 2, slide the belt clip out and away from the battery, and remove the screwdriver.
4.Remove the pencil from the clip.