![](/images/new-backgrounds/1239628/23962839x1.webp)
Basic Operation
4
Turning the Radio On
1.Turn the on/off/volume control clockwise until it clicks. You will hear a chirp tone after a successful
NOTE:
Volume Control
Each time it is turned on, the radio per- forms a self check to validate correct operation. If the radio is not operating at the exact parameters set in the facto- ry or field, you will hear a
2.The unit automatically operates dependant on current switch settings. Set the volume by turning the on/off/volume control clockwise. One half turn equals about 50% output.
Receiving
Trunked Modes and Conventional Channels
1.Turn the radio on and select the desired mode and group for trunking, or desired mode and channel for conventional.
2.Listen until you hear a transmission, then adjust the volume control for a comfortable listening level.
3.Your radio is now set to receive calls on the selected mode.
NOTE: If the mode selector knob and the 3- position toggle switch are both placed on an unprogrammed position (blank position), you will hear an “invalid
Basic Operation
Basic Operation | 19 |