Features and
Functions Guide
H670
Bluetooth®
TURNING HEADSET
ON AND OFF
To turn your headset on, slide the switch toward the microphone. The indicator light is steadily purple for several seconds, then flashes blue (if paired and connected with another device) or is steadily blue (if ready
EARHOOKS ANDYOUR
HEADSET
Your H670 headset is supplied with multiple earhooks. The earhook is attached onto a hinge pin, and is placed onto your ear when using your headset. To install an earhook on your headset:
WEARINGTHE
HEADSET
Once you have attached your desired earhook, follow these steps to wear your headset on your ear:
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the volume buttons on your headset.
1 Turn the headset power off. |
Handsfree Headset
IMPORTANT:
Be sure to first follow the
Quick Start Guide on the reverse side of this guide
to complete initial setup
of your H670.
to be paired).
To turn your headset off, slide the switch toward the charging plug. The indicator light will turn off.
Slide Switch
Indicator Light 
1Open the attached earhook 90 degrees from the headset.
2Gently lift and pull the top of the earhook up and off the upper hinge pin. Then, pull it away to remove it.
3Position the headset for right or left ear use (right ear use is displayed).
4Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.
1 Open Earhook
2 Pull Earhook Up
Hinge Pin
earhook 45 degrees from the headset.
2Loop the earhook over your ear.
3Press earhook to your ear.
When worn, your headset will look like this on your head:
2
3
2 Press and hold the Volume button you |
want to assign as the "volume up" button |
and slide the switch toward the |
microphone. The indicator light is either |
steadily lit or flashing in blue. |
Volume
Buttons 
Slide
Switch
European Union Directives
Conformance Statement
Hereby, Motorola declares that this product is in compliance with:
•The essential requirements and other relevant provisions of Directive 1999/5/EC.
•All other relevant EU Directives.
Product
Approval
Number
The above gives an example of a typical Product Approval Number.
You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.
MAKING CALLS
Function | Action |
Receive a call | Tap the Call button |
Mute or unmute a call | Tap both Volume |
| buttons |
Reject a call | Press and hold a |
| Volume button until |
| you hear two |
| ascending tones |
End a call | Tap the Call button |
Redial last call | Press and hold the |
| Call button until you |
| hear two ascending |
| tones |
Make a voice dial call | Tap the Call button |
| and speak the |
| name after the tone |
Note: Your H670 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.
MAKING CALLS CONTINUED
Function | Action |
|
Answer a second | Tap the Call button | |
incoming call |
|
|
End an active call and | Tap the Call button | |
resume a call on hold |
|
|
Disable the | First slide the switch | |
indicator light | toward charging plug | |
| (to turn headset off), | |
| then press and hold | |
| both Volume | |
| buttons AND slide | |
| the switch towards | |
| the microphone (to | |
| turn headset on) | |
Note: Some features are phone/network dependent.
INDICATOR LIGHTS
With the Charger Plugged In
Headset Indicator | Headset Status |
|
Steady red | Charging |
|
Off | Charging complete | |
With No Charger Plugged In | ||
|
|
|
Headset Indicator | Headset Status | |
Off | Power off |
|
Steady purple | Powering up | |
Steady blue | Pairing/connection | |
| mode | |
10 rapid purple flashes | Connection successful | |
Slow blue flash | Standby (not on call) | |
Quick blue flash | Incoming call | |
Slow blue pulse | Connected (on a call) | |
Slow purple pulse | Connected | |
| (on a muted call) | |
Red flash | Idle (not connected) | |
Quick red flash | Low battery | |
Note: After 30 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.
AUDIOTONES
AudioTone | Headset Status |
Ring tone | Incoming call |
Single high tone | Pairing confirmation |
High to low tone | End call / |
| phone network |
| not available |
Single high tone when | Volume at minimum |
pressing volume button | or maximum |
Two ascending tones | Mute enabled |
Two descending tones | Mute disabled |
Low to high tone | Voice activation |
No audio indications; | Out of range |
deteriorating quality |
|
Two tones | Low battery |
repeated every 60 sec. |
|
