Motorola i2000 Keypad Lock

18 www.nextel.com
When the PIN is enabled, you are prompted to enter your
PIN each time you turn on your i2000 phone. Until a valid
PIN is entered, you can use the phone only to make
emergency calls depending on the network.
After the PIN is accepted, the Phone Ready screen
displays.
Light Sensor
On your i2000 phone, when a key is pressed, the light sensor will activate the
backlight only when your phone is in poor lighting conditions. If illumination is
needed, even when the backlight is disabled, you can manually override the
sensor by pressing and holding the n key. This will activate the backlight. If
the phone is in a charger, the backlight will always be illuminated.
Keypad Lock
The i2000 phone includes a Keypad Lock feature that enables you to quickly
lock the phone’s keypad to avoid inadvertently pressing keys or placing calls.
Once Keypad Lock is activated, you can only perform the following tasks
(unless you receive an incoming call, page, etc.):
•Turn your phone On/Off
•Unlock the keypad
NOTE:Before locking your phone’s keypad, you may want to read this
entire section to learn how to respond to incoming calls, pages,
etc.
6 Press o under “Ok”.
7 Press o under “Exit”.
Incorrectly entering your PIN three
times causes the phone to be blocked.
To unblock your phone, you must
contact Nextel Customer Care. For
more information, see “Unblocking
the PIN” on page 16 .
a b
Enter
SIM PIN