Motorola i500plus manual Adding and Removing a Battery from the Rear Pocket

Accessories

1Insert the power supply’s DC jack plug into the DC jack recepta- cle on the back of the Charger.

NOTE: Use only with the Motorola rapid charger included with your Desktop Charger package.

2Plug the power supply end of the power-supply cord into any standard AC outlet. The Charger performs a quick power-up self-test. The LED indicators will flash once to indicate a suc- cessful power-up.

3Attach a battery to your i 500plus phone.

4Place the accessory and data cable connector on your i 500plus phone into the pin connector located in the charger’s front pocket.

Adding and Removing a Battery from the Rear Pocket

INSERT	REMOVE
1	2
	1

1Insert the Battery with the Motorola label facing forward and the

(+) and (-) symbols pointing downward.

2To remove the Battery, pull it forward, then up and out of the Charger.

NOTE: If a battery is in the rear pocket and the i 500plus phone with a battery is inserted into the front pocket, the battery in the front pocket will charge to full capacity before the battery in the rear pocket is charged. The LED for the rear pocket flashes yellow, indicating that its battery is waiting to be charged. To remove the battery from the rear pocket, hold the base of the Charger and pull the battery forward then straight up.

95