Motorola i500plus manual Pause Digit Entry

Phone Based

4Enter Phone Number displays. Enter person’s area code and phone number and pressounder “Store”.

Remember to add plus and pause entries if desired. See “Pause Digit Entry” on page 17 and “Plus Dialing” on page 27.

5The name and Spd# = displays. The system automatically

assigns a speed dial number, which you can change by entering a new number. Pressounder “Store”.

6Enter PrvtID displays. Enter the person’s Direct Connect pri- vate ID. Pressounder “Store”.

7Repeat steps 2 through 6 to add additional names/numbers.

8Pressounder “Exit” when you have finished.

NOTE: To see the name with Caller ID, enter the caller’s 10-digit phone number (703-555-9999) in your phone list (see “Caller ID” on page 50).

Pause Digit Entry

When storing a number, you can program your phone so that it will not only dial a number but also pause and enter another series of numbers such as a personal identification number (PIN) or password. This feature is particularly useful for automated services such as voice mail and banking systems.

Here’s how it works! Let’s say you have a company voice mail account that you frequently check while on travel. And, to access that account you must do the following:

•Dial your work number;

•Press # while the voice mail greeting is being played; and

•Enter your PIN to access your messages.

You can program your i 500plus phone to enter all of the above information for you. All you have to do is separate each entry with a pause. If you were to program your phone to automatically input the above information, the stored data would look like this 17035551234P#P1234. In this example, the first eleven digits represent the number that must be dialed to access your voice mail. The P represents a 3 second pause. The # interrupts your greeting. The second P represents another 3 second pause. The last four digits represent your PIN.

17