Settings

Setting Baud Rate

You can set your phone’s baud rate from the Initial Setup screen. Scroll to the Baud Rate option and then choose the baud rate you want, or choose Auto to set your phone to automatically choose the appropriate baud rate.

Setting TTY Mode

NOTE: This feature may not be offered by your service provider.

TTY Setup enables you to set your options for using your phone with a teletypewriter (TTY) device. By default, your phone is set to function with a TTY device in TTY mode.

Your phone supports the following TTY modes:

TTY — for calls in which you type and read text on your TTY device.

VCO (Voice-Carry-Over) — for calls in which you speak into your phone and read text replies on your TTY device.

HCO (Hearing-Carry-Over) — for calls in which you type text on your TTY device on listen to voice replies on your phone’s speaker.

You can set your TTY mode using your phone’s Settings menu at any time, or by issuing commands from your TTY device while on an active call.

To set your phone’s TTY mode using your phone’s Settings menu:

1From the Initial Setup screen, press R to scroll to TTY Setup.

2Press B under CHANGE.

3Press S to scroll to the desired TTY mode; Off, TTY, VCO, or HCO.

4Press B under SELECT.

147

Page 155
Image 155
Motorola i58sr manual Setting Baud Rate, Setting TTY Mode, 147