Using the Modem

3.To change the inactivity period, enter a new time. To turn the Inactivation Timer off, uncheck the box.

4.Click Set.

Running Applications over Packet Data

You can run any standard TCP/IP application during a packet data session.

N O T E

When a packet-data session is active, any software specifically configured for use with other service providers may need to be reconfigured for use with your service provider.

Connecting to the Internet via Circuit Data

Before attempting to use your iM1100 Wireless Modem to connect to the internet via circuit data, contact your Internet Service Provider (ISP) for specific instructions on setting up a modem to access their server.

To make a circuit data connection using your iM1100 Wireless Modem:

1.Open the Dial-Up Networking window. The steps you take to access this window and the exact look of this window depend on your operating system.

2.From the Dial-Up Network window, double-click Make New Connection.

3.Follow the instructions presented by the installation wizard.

31

Page 35
Image 35
Motorola iM1100 manual Running Applications over Packet Data, Connecting to the Internet via Circuit Data