iM1100 Wireless Modem Hardware

Charging the Battery

To charge the iM1100 Wireless Modem:

1.With your modem facing up, plug the accessory connector of the Travel Charger (included with your modem) into the charging port on the right side of the modem.

2.Flip open the charger’s’ prongs.

3.Plug the charger into an electrical outlet.

The first time you charge the battery, it takes three hours. Subsequent charges take about two and a half hours.

You can charge the modem battery when the modem is on or off.

N O T E

Your iM1100 Wireless Modem’s battery must be fully charged when you install the iM1100 Wireless Modem Application and Installation Software.

Status Light

The LED status light located on the front panel of the iM1100 Wireless Modem indicates the service state of your modem.

When Using Modem.

Status Light

iM1100 Modem Status

 

 

Flashing Red

Registering. Your modem is registering to your

 

service providers network. Please wait.

 

 

Solid Red

No service. Your modem can’t register with the

 

network. The modem will continue trying to

 

register every two minutes until it is powered

 

off.

 

 

Flashing

Unit registered. No packet data service.

Amber

 

 

 

5

Page 9
Image 9
Motorola iM1100 manual Charging the Battery, Status Light, When Using Modem