•Press MENU to confirm. Display will show CELLULAR READY?.
•Refer to section 3.2.1 to proceed with the next steps.
NOTE
When pairing a new cellular, the connected cellular will be disabled temporarily.
3.2.3Paired Devices
The cellular(s) paired up will be displayed in the paired devices list, no matter it(they) is(are) connected or not. You can choose to connect, or remove the cellular from this menu.
1.Press MENU and then VOL+ or REDIAL/VOL- to select
PAIRED DEVICES.
2.Display will show the Cellular name of paired device(s) .
NOTE
Display will show NO PAIRED DEVICE if there is no device paired up.
3.Press MENU and then VOL+ or REDIAL/VOL- to select the desired cellular device.
For the connected cellular device:
4.Press MENU to remove the cellular device.
5.Press MENU to confirm.
Using the phone
For the cellular phone that is not connected:
4.Press MENU and then VOL+ or REDIAL/VOL- to select
CONNECT or REMOVE CELLULAR.
5.Press MENU to confirm. If you select REMOVE CELLULAR, press MENU again to confirm.
NOTE
• | When the connected cellular is removed, corresponding | ||||
| device | or | will be off. |
| |
• | When the disconnected cellular is connected, | ||||
| corresponding device | or | will be on. | ||
•When the cellular is removed, the device name will be removed and EMPTY will be displayed instead in the paired device list.
3.3Making a home call using your landline
1.Enter the phone number and press 
/FLASH or 
/ SPEAKER to dial the phone number.
15
