Motorola L514BT, L515BT, L512BT, L502BT manual Set the Area Code, Registration, To reset all settings

3.23Set the Area Code

1.Press MENU and then VOL+ or REDIAL/VOL- to select

SETUP BS.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

AREA CODE.

3.Press MENU and enter the area code.

4.Press MENU to save.

3.24Registration

Up to 5 handsets can be registered to one base. The original handset is pre-registered to use. Additional handsets must be registered to the base before you can use them.

To register an additional handset,

1.Press MENU and then VOL+ or REDIAL/VOL- to select

SETUP HS.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

REGISTRATION.

3.Press MENU and then VOL+ or REDIAL/VOL- to select

YES or NO.

4.Select YES and press MENU to enter the registration procedure as below:

1.Press and hold FIND for 4 seconds on base, and then release.

2.Place the unregistered cordless handset on the base or charger.

3.A confirmation tone is generated if registration is successful. HANDSET X is displayed where X denotes the

number of handsets and the phone goes back to idle. To register an originally unregistered handset, follow steps 1 through 3 above.

3.25To reset all settings

1.Press MENU and then VOL+ or REDIAL/VOL- to select

RESET SETTINGS.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

ALL SETTINGS.

3.Press MENU to select YES. Then all the personalized settings will be reset to default.

Using the phone 25