Q-Logic 59226-00 B manual Hardreset Command, Syntax

A

A – Command Line Interface Hardreset Command

Hardreset Command

Resets the switch and performs a power-on self test. This reset disrupts traffic, activates the pending firmware, and clears the alarm log. To save the alarm log before resetting, refer to the “Set Log Command” on page A-51.

Authority	Admin session
Syntax	hardreset
Notes	To reset the switch without a power-on self test, refer to the “Reset Command” on
	page A-31.
	To reset the switch without disrupting traffic, refer to the “Hotreset Command” on
	page A-22.

59226-00 B A-19