Q-Logic 59226-00 B manual Topology, Displays all connected devices, Users

A

A – Command Line Interface Show Command

Table A-16. Switch Operational Parameters (Continued)

Parameter	Description
LogLevel	Event severity level used to record events
	in the event log
MaxPorts	Number of ports available on the switch
NumberOfResets	Number of times the switch has been reset
	over its service life
ReasonForLastReset	Action that caused the last reset
ActiveImageVersion - build date	Active firmware image version and build
	date.
PendingImageVersion - build date	Firmware image version and build date
	that is pending. This image will become
	active at the next reset or power cycle.
ActiveConfiguration	Name of the switch configuration that is in
	use.
AdminState	Switch administrative state
AdminModeActive	Admin session status
BeaconOnStatus	Beacon status as set by the Set Beacon
	command.
OperationalState	Switch operational state
PrincipalSwitchRole	Principal switch status. True indicates that
	this switch is the principal switch.
BoardTemp (1) - Degrees Celsius	Internal switch temperature at circuit board
	sensor 1
SwitchDiagnosticsStatus	Results of the power-on self test
SwitchTemperatureStatus	Switch temperature status: normal, warn-
	ing, failure

topology

Displays all connected devices.

timezone

Displays the current time zone setting.

users

Displays a list of logged-in users. This is equivalent to the User List command.

59226-00 B A-69