Q-Logic 59226-00 B manual Deactivate, Delete zoneset, Remove zoneset zonelist, Zones zoneset

A – Command Line Interface Zoneset Command

S

deactivate

Deactivates the active zone set. Close the Zoning Edit session before using this keyword.

delete [zone_set]

Deletes the zone set given by [zone_set]. If the specified zone set is active, the command is suspended until the zone set is deactivated.

list

Displays a list of all zone sets. This keyword does not require an Admin session.

remove [zone_set] [zone_list]

Removes a list of zones given by [zone_list] from the zone set given by

[zone_set]. Use a <space> to delimit zone names in [zone_list]. If [zone_set] is the active zone set, the zone will not be removed until the zone set has been deactivated.

rename [zone_set_old] [zone_set_new]

Renames the zone set given by [zone_set_old] to the name given by [zone_set_new]. You can rename the active zone set.

zones [zone_set]

Displays all zones that are components of the zone set given by [zone_set]. This keyword does not require an Admin session.

Notes	„ A zone set must be active for its definitions to be applied to the fabric.
	„ Only one zone set can be active at one time.
	„ A zone can be a component of more than one zone set.
Examples	The following is an example of the Zoneset Active command:
	SANbox #> zoneset	active
	ActiveZoneSet	Bets
	LastActivatedBy	admin@OB-session6
	LastActivatedOn	day month date time year
	The following is an example of the Zoneset List command:
	SANbox #> zoneset	list
	Current List of	ZoneSets

------------------------

alpha beta

A-104 59226-00 B