Q-Logic 59226-00 B manual Snmp Properties Dialog

4 – Managing Switches Configuring a Switch

S

4.7.5

SNMP Properties

Use the SNMP Properties dialog shown in Figure 4-12to change SNMP configuration parameters. After making changes, click the OK button to put the new values into effect. To open the SNMP Properties dialog, select a switch in the topology display or open the faceplate display, open the Switch menu and select SNMP Properties.

NOTE: Since Read Community, Trap Community, and Write Community settings are like passwords, they are write-only fields; the current settings are not displayed.

Figure 4-12. SNMP Properties Dialog

4-28 59226-00 B