
A
A – Command Line Interface Set Config Command
Table A-9. Set Config Port Parameters (Continued)
Parameter | Description |
|
|
LinkSpeed | Transmission speed: |
| The default is Auto. |
PortType | Port type: GL, G, F, FL, Donor. The default is GL. |
SymbolicPortName | Descriptive name for the port. The name can be up to 32 |
| characters excluding #, semicolon (;), and comma (,). |
| The default is Port n where n is the port number. |
ALFairness | Arbitration loop fairness. Enables (True) or disables |
| (False) the switch’s priority to arbitrate on the loop. The |
| default is False. |
DeviceScanEnabled | Enables (True) or disables (False) the scanning of the |
| connected device for |
| login. The default is True. |
ForceOfflineRSCN | Enables (False) or disables (True) the immediate trans- |
| mission of RSCN messages when communication |
| between a port and a device is interrupted. If enabled, |
| the RSCN message is delayed for 200 ms for locally |
| attached devices and 400 ms for devices connected |
| through other switches. The default is False. This param- |
| eter is ignored if IOStreamGuard is enabled. |
ARB_FF | Send ARB_FF (True) instead of IDLEs (False) on the |
| loop. The default is False. |
InteropCredit | Interoperability credit. The number of |
| credits per port. 0 means the default (8) is unchanged. |
| Changing interoperability credits is necessary only for |
| E_Ports that are connected to |
| switches. Contact your authorized maintenance provider |
| for assistance in using this feature. |
ExtCredit | Extended credits. The number of port buffer credits that |
| this port can acquire from donor ports. The default is 0. |
FANEnable | Fabric address notification. Enables (True) or disables |
| (False) the communication of the FL_Port address, port |
| name, and node name to the |
| default is True. |
|
|
|