Graphic Window, Data Window and Tabs | Q-Logic 59226-00 B instruction

A

2 – Using SANsurfer Switch Manager SANsurfer Switch Manager User Interface

2.11.4

Graphic Window

The graphic window, shown in Figure 2-6, presents graphic information about fabrics and switches such as the fabric topology and the switch faceplate. The window height can be adjusted by clicking and dragging the window border that it shares with the data window.

2.11.5

Data Window and Tabs

The data window presents a table of data and statistics associated with the selected tab. Use the scroll bar to browse through the data. The window length can be adjusted by clicking and dragging the border that it shares with the graphic window.

Adjust the column width by moving the pointer over the column heading border shared by two columns until a right/left arrow graphic is displayed. Click and drag the arrow to the desired width.

The data window tabs present options for the type of information to display in the data window. These options vary depending on the display.

2.11.6

Working Status Indicator

The working status indicator, located in the lower right corner of the SANsurfer Switch Manager window, shows when the management workstation is exchanging information with the fabric. As conditions change, the fabric forwards this information to the management workstation where it is reflected in the various displays.

59226-00 B

2-25

Image 41

Q-Logic 59226-00 B manual Graphic Window, Data Window and Tabs, Working Status Indicator

Contents

SANbox 1400 Series Switch Management User’s Guide Revision B Changes Document Sections Affected Document Revision History Table of Contents Section Managing Fabrics SANbox 1400 Series Switch Management User’s Guide Section Managing Switches Section Managing Ports Appendix a Command Line Interface Glossary Index List of Figures List of Tables SANbox 1400 Series Switch Management User’s Guide 59226-00 B Related Materials Intended Audience Jdom License Training Technical SupportAvailability Contact Information Using SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements For a Linux platform SANsurfer Switch ManagerFor a Windows platform SANsurfer Management Suite SMS Installation for WindowsFor a Solaris platform For a Mac OS X platform 59226-00 B SMS Installation for Linux Chmod +x sansurferswitchmgrlinuxx.xx.xx.bin SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer command SANsurfer Switch Manager Window Save Default Fabric View File Dialog Exiting SANsurfer Switch Manager Load Default Fabric File Dialog SMS Uninstall Uninstalling SANsurfer Switch Manager UninstallerData/UninstallSANsurferSwitchManager Standalone Uninstall Saving and Opening Fabric View Files Changing the Encryption Key for the Default Fabric View File Setting SANsurfer Switch Manager Preferences Viewing Software Version and Copyright Information Using Online Help Faceplate Display SANsurfer Switch Manager User InterfaceTopology Display Topology Display Menu Menu Bars Shortcut Keys Faceplate Display Menu Tool Bar Button Description Tool BarTool Bar Buttons Fabric Tree Fabric Tree Data Window and Tabs Working Status IndicatorGraphic Window 10. Topology Display Using the Topology Display Selecting Switches and Links Switch and Link StatusWorking with Switches and Links Opening the Faceplate and Topology Display Popup Menus Arranging Switches in the Display Topology Data Windows Port Views and Status Using the Faceplate Display Opening the Faceplate Popup Menu Working with PortsSelecting Ports Faceplate Data Windows Components of Fibre Channel fabric security are Fabric SecurityUser Account Security Enabling Snmp Configuration Fabric ServicesClick the In-band Management Enable button Enabling In-band Management Saving a Version Snapshot Security Consistency ChecklistTracking Fabric Firmware and Software Versions Managing the Fabric Database Viewing and Comparing Version SnapshotsExporting Version Snapshots to a File Add a New Fabric Dialog Adding a Fabric Opening a Fabric View File Removing a FabricSaving a Fabric View File Rediscovering a Fabric Adding a New Switch to a Fabric Deleting Switches and Links Replacing a Failed Switch Fabric Status Displaying Fabric Information Switch Icon Description Topology Display Switch and Status Icons Events Browser Displaying the Event Browser Severity Levels Discarded when you close a SANsurfer Switch Manager sessionEditor or browser Severity Description Icon Filter Events Dialog Filtering the Event Browser Saving the Event Browser to a File Sorting the Event Browser Entry Description Devices Data WindowDevices Data Window Entries Active Zone Set Data Window Active Zone Set Data Window Link Data Window SANsurfer Switch Manager enables you to do the followingWorking with Device Information and Nicknames Displaying Detailed Device Information Creating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Soft Zones Zones Zone Sets Access Control List Hard ZonesAliases Zoning Database Managing the zoning database consists of the following Using the Zoning WizardManaging the Zoning Database Edit Zoning Dialog Editing the Zoning Database Managing Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Interop Auto Save Configuring the Zoning Database Discard Inactive Default VisibilitySaving the Zoning Database to a File Restoring the Zoning Database from a File Removing All Zoning Definitions Restoring the Default Zoning Database Creating a Zone Set Managing Zone Sets Removing a Zone from a Zone Set or from All Zone Sets Activating and Deactivating a Zone SetCopying a Zone to a Zone Set Managing zones involves the following Removing a Zone SetManaging Zones Creating a Zone in a Zone Set Adding Zone Members Removing a Zone Member Renaming a Zone or a Zone SetRemoving a Zone from a Zone Set Removing a Zone from All Zone Sets Creating an Alias Changing Zone TypesManaging Aliases Removing an Alias from All Zones Adding a Member to an Alias Zone Merge Failure Merging Fabrics and Zoning Zone Merge Failure Recovery Managing Switches Factory User Accounts Account Name Password Admin Authority ExpirationManaging User Accounts Creating User Accounts User Account Administration Dialog Add Account Removing a User Account User Account Administration Dialog Remove Account User Account Administration Dialog Change Password Changing a User Account Password Modifying a User Account User Account Administration Dialog Modify Account Faceplate Display Switch Information Displaying Switch Information Switch Data Window Entries Switch Data Window Ratov Switch Data Window Entries Port Information Data Window Port Statistics Data Window Configured Zonesets Data Window Configured Zonesets Data Window Port Threshold Alarm Configuration Dialog Configuring Port Threshold Alarms Port Threshold Alarm Example Paging a Switch Resetting a Switch Setting the Date/Time and Enabling NTP Client Type Description Switch Resets Using the Configuration Wizard Configuring a Switch Symbolic Name Switch Properties Parameter Description Switch Administrative StatesSwitch Administrative States Fabric Device Management Interface Domain ID and Domain ID Lock In-band Management Broadcast Support 10. Advanced Switch Properties Dialog Advanced Switch Properties Timeout Values Timeout Values Legacy Port Address Format Interop Mode for Zoning 11. Network Properties Dialog Network Properties IP Configuration Parameters IP Configuration NTP Client Remote Logging 12. Snmp Properties Dialog Snmp Properties Snmp Configuration Parameters Snmp Configuration Snmp Trap Configuration Parameters Snmp Trap Configuration Archiving a Switch 13. Restore Dialogs Full and Selective Restoring a Switch Managing Switches Restoring a Switch Setting Value Restoring the Factory Default ConfigurationFactory Default Configuration Settings Downloading a Support File Installing Firmware 14. Hardware Status LEDs Displaying Hardware Status Managing Switches Displaying Hardware Status 59226-00 B Displaying Port Information Managing Ports Displaying Port Types Monitoring Port StatusPort Types State Description Displaying Port Speeds Displaying Port Operational StatesPort Operational States Port Speeds Media Icon Description Displaying Transceiver Media StatusPort Transceiver Media View Port Statistics Data Window Entries LIP ALPD,ALPS Entry Description Port Address Port Fibre Channel address Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring Ports Port Administrative States Changing Port Administrative States Changing Port Speeds Changing Port Types Device Scan Changing Port Symbolic NameStream Guard Designate Donor Ports Using the Extended Credits Wizard Testing Ports Resetting a Port Managing Ports Testing Ports Performance View Graphs Graphing Port Performance Starting SANsurfer Performance View This section describes how to do the following Exiting SANsurfer Performance View Save Default Performance View File Dialog Saving and Opening Performance View Files Load Default View File Dialog Setting SANsurfer Performance View Preferences Changing the Default Performance View File Encryption Key Displaying Graphs for a Switch Setting the Polling Frequency Customizing Graphs Arranging Graphs in the Display Default Graph Options Dialog Rescaling a Selected Graph Setting Global Graph Type Saving Graph Statistics to a File Printing Graphs Managing Ports Graphing Port Performance 59226-00 B Logging On to a Switch Command Line Interface User Accounts Working with Switch Configurations Modifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Keystroke Effect CommandsTable A-1. Command-Line Completion Admin Session Commands Table A-2. Commands Listed by Authority LevelMonitoring Commands Configuration Command Authority Admin CommandSyntax Keywords Syntax alias Alias CommandKeywords add alias memberlist Copy aliassource aliasdestination List Delete aliasMembers alias Remove alias memberlist Keywords activate configname Config CommandSyntax config Save configname Edit confignameRestore # ftp symbolicname or ipaddress Syntax create support Create Support CommandAuthority None Local directory now /itasca/conf/images bin Keywords MMDDhhmmCCYY Date CommandSyntax date Authority None Syntax feature Feature CommandKeywords add licensekey Log Syntax firmware install Firmware Install CommandAuthority Admin Syntax Hardreset Command Help command keyword Help CommandCommand Keyword History History CommandFollowing is an example of the History command Hotreset Hotreset Command Image Command Ftp Ftp switchname Wait for the unpack to complete Admin session Lip CommandFollowing is an example of the Lip command Lip portnumber Syntax passwd accountname Keywords accountname Passwd Command Authority None Syntax ping Ping CommandIpaddress Keywords ipaddress Examples The following is an example of the Ps command Ps CommandAuthority None Syntax ps Displays current system process information Syntax quit, exit, or logout Quit CommandCloses the Telnet session Keywords config configname Reset CommandSyntax reset Table A-3. Switch Configuration Defaults SwitchParameter Default System Arbff Table A-4. Port Configuration Defaults Table A-5. Port Threshold Alarm Configuration Defaults Table A-7. Snmp Configuration Defaults Table A-6. Zoning Configuration Defaults Table A-8. System Configuration Defaults Keywords alarm option Set CommandConfig option Syntax set Switch state Setup optionLog option Pagebreak state Timezone Set config Set Config CommandTable A-9. Set Config Port Parameters Port portnumber Send Arbff True instead of IDLEs False on Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Resource Allocation Timeout Value. The number Threshold Table A-11. Set Config Threshold Parameters Table A-12. Set Config Zoning Parameters Arbff Edtov Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Attributes Following is an example of the Set Config Zoning command Set log Set Log CommandArchive Clear Display filter Port portlist Level filter Save Alarms are always logged and always displayed on the screenStart Stop Enable Set Port CommandKeywords portnumber Bypass alpa State state Disables the port by removing power from the port lasers Set setup Set Setup CommandTable A-13. Snmp Configuration Settings Snmp System Table A-14. System Configuration Settings Table A-14. System Configuration Settings Trap Severity Options SANbox admin # set setup system Following is an example of the Set Setup System command Keywords about Show CommandAuthority None Syntax show Log option Alarm optionFdmi portwwn Lsdb Displays name server information for all switches and portsNs option Pagebreak Tbuf Table A-15. Show Port Parameters LIPF8ALPS Steering domainid Post log Support Table A-16. Switch Operational Parameters Topology Displays the current time zone settingDisplays all connected devices Users Following is an example of the Show Fabric command Following is an example of the Show Domains commandFollowing is an example of the Show Fdmi command Version Following is an example of the Show NS local domain command Following is an example of the Show Fdmi WWN command Following is an example of the Show Interface command Following is an example of the Show NS domainID commandFollowing is an example of the Show NS portID command PL-XPL-VC-SG3-22 Following is an example of the Show Port command Following is an example of the Show Topology command Following is an example of the Show Switch command SANbox # show topology 1 Local Link Information Following is an example of the Show Version command Show config Show Config Command Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show log Show Log CommandNumber of events Component Displays all informative events Displays all warning events Snmp eventsDisplays all critical events Displays all events related to EPorts Level SettingsOptions Port Following is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Syntax shutdown Shutdown Command Syntax test Test CommandKeywords port portnumber testtype Status Admin start Command Line Interface Test Command Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command Keywords accounts User CommandSyntax user Following is an example of the User Edit command Following is an example of the User Accounts commandFollowing is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete command Authority None Syntax whoami Whoami CommandExamples The following is an example of the Whoami command Syntax zone Zone CommandKeywords add zone memberlist Copy zonesource zonedestination Members zone Delete zoneRemove zone memberlist Rename zoneold zonenew Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Delete zoneset DeactivateRemove zoneset zonelist Rename zonesetold zonesetnew Following is an example of the Zoneset Zones command Opens a Zoning Edit session Zoning CommandKeywords active Limit Description LimitsTable A-17. Zoning Database Limits 108 59226-00 B E2JBOD2 Following is an example of the Zoning Limits command Following is an example of the Zoning List command Command Line Interface Zoning Command 59226-00 B 111 Command Line Interface Zoning Command 112 59226-00 B Administrative State Access Control List ZoneAlarm BootP Configured Zone Sets Class 3 ServiceDefault Visibility Fabric Management Switch Inter-Switch Link Input Power LEDMaintenance Button Maintenance Mode Target Soft ZoneUser Account World Wide Name WWN Index Index-2 59226-00 B 59226-00 B Index-3 Index-4 59226-00 B 59226-00 B Index-5 Index-6 59226-00 B 59226-00 B Index-7 Index-8 59226-00 B