Displaying Transceiver Media Status | Q-Logic 59226-00 B manual

5 – Managing Ports Displaying Port Information

S

5.1.1.4

Displaying Transceiver Media Status

To display transceiver media status, open the View menu and select View Port Media. Table 5-4lists the port media states and their meanings.

Table 5-4. Port Transceiver Media View

Media Icon

Description

	Optical SFP, Online (Green)
	Optical SFP, Offline (Gray)
	Copper SFP, Online (Green)
	Copper SFP, Offline (Gray)
None	Empty port, no transceiver installed

5.1.2

Port Statistics Data Window

The Port Statistics data window displays statistics about port performance. To open the Port Statistics window, select one or more ports in the faceplate display and click the Port Stats tab below the data window. Table 5-5describes the Port Statistics data window entries.

The Statistics pull-down menu is available on the Port Statistics data window, and provides different ways to view detailed port information. Click the down arrow to open the pull-down menu. Open the pull-down menu and select Absolute to view the total count of statistics since the last switch or port reset. Select Rate to view the number of statistics counted per second over the polling period. Select Baseline to view the total count of statistics since the last time the baseline was set. When viewing baseline statistics, click the Clear Baseline button to set the current baseline. The baseline will also be set when the switch status changes from unreachable to reachable.

5-4	59226-00 B

Image 130

Q-Logic 59226-00 B manual Displaying Transceiver Media Status, Port Transceiver Media View, Media Icon Description

Contents

SANbox 1400 Series Switch Management User’s Guide Document Revision History Revision B Changes Document Sections Affected Table of Contents Section Managing Fabrics SANbox 1400 Series Switch Management User’s Guide Managing Switches Section Section Managing Ports Appendix a Command Line Interface Glossary Index List of Figures List of Tables SANbox 1400 Series Switch Management User’s Guide 59226-00 B Intended Audience Related Materials Jdom License Availability Technical SupportTraining Contact Information Using SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements For a Windows platform SANsurfer Switch ManagerFor a Linux platform For a Solaris platform SMS Installation for WindowsSANsurfer Management Suite For a Mac OS X platform 59226-00 B SMS Installation for Linux Chmod +x sansurferswitchmgrlinuxx.xx.xx.bin SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh Starting SANsurfer Switch Manager ‰ For Linux or Solaris enter the SANsurfer command Initial Startup Dialog SANsurfer Switch Manager Window Exiting SANsurfer Switch Manager Save Default Fabric View File Dialog Load Default Fabric File Dialog Uninstalling SANsurfer Switch Manager SMS Uninstall Standalone Uninstall UninstallerData/UninstallSANsurferSwitchManager Changing the Encryption Key for the Default Fabric View File Saving and Opening Fabric View Files Setting SANsurfer Switch Manager Preferences Using Online Help Viewing Software Version and Copyright Information Topology Display SANsurfer Switch Manager User InterfaceFaceplate Display Menu Bars Topology Display Menu Faceplate Display Menu Shortcut Keys Tool Bar Buttons Tool BarTool Bar Button Description Fabric Tree Fabric Tree Graphic Window Working Status IndicatorData Window and Tabs Using the Topology Display 10. Topology Display Working with Switches and Links Switch and Link StatusSelecting Switches and Links Arranging Switches in the Display Opening the Faceplate and Topology Display Popup Menus Topology Data Windows Using the Faceplate Display Port Views and Status Selecting Ports Working with PortsOpening the Faceplate Popup Menu Faceplate Data Windows User Account Security Fabric SecurityComponents of Fibre Channel fabric security are Click the In-band Management Enable button Fabric ServicesEnabling Snmp Configuration Enabling In-band Management Tracking Fabric Firmware and Software Versions Security Consistency ChecklistSaving a Version Snapshot Exporting Version Snapshots to a File Viewing and Comparing Version SnapshotsManaging the Fabric Database Adding a Fabric Add a New Fabric Dialog Saving a Fabric View File Removing a FabricOpening a Fabric View File Rediscovering a Fabric Deleting Switches and Links Adding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Fabric Status Topology Display Switch and Status Icons Switch Icon Description Displaying the Event Browser Events Browser Editor or browser Discarded when you close a SANsurfer Switch Manager sessionSeverity Levels Severity Description Icon Filtering the Event Browser Filter Events Dialog Sorting the Event Browser Saving the Event Browser to a File Devices Data Window Entries Devices Data WindowEntry Description Active Zone Set Data Window Active Zone Set Data Window Working with Device Information and Nicknames SANsurfer Switch Manager enables you to do the followingLink Data Window Displaying Detailed Device Information Managing Device Port Nicknames Exporting Device Information to a FileCreating a Nickname Deleting a Nickname Editing a NicknameExporting Nicknames to a File Zoning a Fabric Importing a Nicknames FileZoning Concepts Zones Soft Zones Aliases Access Control List Hard ZonesZone Sets Zoning Database Managing the Zoning Database Using the Zoning WizardManaging the zoning database consists of the following Editing the Zoning Database Edit Zoning Dialog Managing Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Configuring the Zoning Database Interop Auto Save Saving the Zoning Database to a File Default VisibilityDiscard Inactive Restoring the Zoning Database from a File Restoring the Default Zoning Database Removing All Zoning Definitions Managing Zone Sets Creating a Zone Set Copying a Zone to a Zone Set Activating and Deactivating a Zone SetRemoving a Zone from a Zone Set or from All Zone Sets Managing Zones Removing a Zone SetManaging zones involves the following Creating a Zone in a Zone Set Adding Zone Members Removing a Zone from a Zone Set Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from All Zone Sets Managing Aliases Changing Zone TypesCreating an Alias Adding a Member to an Alias Removing an Alias from All Zones Merging Fabrics and Zoning Zone Merge Failure Zone Merge Failure Recovery Managing Switches Managing User Accounts Account Name Password Admin Authority ExpirationFactory User Accounts User Account Administration Dialog Add Account Creating User Accounts User Account Administration Dialog Remove Account Removing a User Account Changing a User Account Password User Account Administration Dialog Change Password User Account Administration Dialog Modify Account Modifying a User Account Displaying Switch Information Faceplate Display Switch Information Switch Data Window Switch Data Window Entries Ratov Switch Data Window Entries Port Statistics Data Window Port Information Data Window Configured Zonesets Data Window Configured Zonesets Data Window Configuring Port Threshold Alarms Port Threshold Alarm Configuration Dialog Paging a Switch Port Threshold Alarm Example Setting the Date/Time and Enabling NTP Client Resetting a Switch Switch Resets Type Description Configuring a Switch Using the Configuration Wizard Switch Properties Symbolic Name Switch Administrative States Switch Administrative StatesParameter Description Domain ID and Domain ID Lock Fabric Device Management Interface Broadcast Support In-band Management Advanced Switch Properties 10. Advanced Switch Properties Dialog Timeout Values Timeout Values Interop Mode for Zoning Legacy Port Address Format Network Properties 11. Network Properties Dialog IP Configuration IP Configuration Parameters Remote Logging NTP Client Snmp Properties 12. Snmp Properties Dialog Snmp Configuration Snmp Configuration Parameters Snmp Trap Configuration Snmp Trap Configuration Parameters Archiving a Switch Restoring a Switch 13. Restore Dialogs Full and Selective Managing Switches Restoring a Switch Factory Default Configuration Settings Restoring the Factory Default ConfigurationSetting Value Downloading a Support File Installing Firmware Displaying Hardware Status 14. Hardware Status LEDs Managing Switches Displaying Hardware Status 59226-00 B Managing Ports Displaying Port Information Port Types Monitoring Port StatusDisplaying Port Types State Description Port Operational States Displaying Port Operational StatesDisplaying Port Speeds Port Speeds Port Transceiver Media View Displaying Transceiver Media StatusMedia Icon Description Port Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Entry Description Port Address Port Fibre Channel address Port Information Data Window Entries Port Information Data Window Entries Configuring Ports Port Properties Dialog Changing Port Administrative States Port Administrative States Changing Port Speeds Changing Port Types Stream Guard Changing Port Symbolic NameDevice Scan Using the Extended Credits Wizard Designate Donor Ports Resetting a Port Testing Ports Managing Ports Testing Ports Graphing Port Performance Performance View Graphs This section describes how to do the following Starting SANsurfer Performance View Save Default Performance View File Dialog Exiting SANsurfer Performance View Load Default View File Dialog Saving and Opening Performance View Files Changing the Default Performance View File Encryption Key Setting SANsurfer Performance View Preferences Setting the Polling Frequency Displaying Graphs for a Switch Arranging Graphs in the Display Customizing Graphs Default Graph Options Dialog Setting Global Graph Type Rescaling a Selected Graph Printing Graphs Saving Graph Statistics to a File Managing Ports Graphing Port Performance 59226-00 B Command Line Interface Logging On to a Switch Working with Switch Configurations User Accounts Modifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Table A-1. Command-Line Completion CommandsKeystroke Effect Monitoring Commands Configuration Command Table A-2. Commands Listed by Authority LevelAdmin Session Commands Syntax Admin CommandAuthority Keywords Keywords add alias memberlist Alias CommandSyntax alias Copy aliassource aliasdestination Members alias Delete aliasList Remove alias memberlist Syntax config Config CommandKeywords activate configname Restore Edit confignameSave configname # ftp symbolicname or ipaddress Authority None Create Support CommandSyntax create support Local directory now /itasca/conf/images bin Syntax date Date CommandKeywords MMDDhhmmCCYY Keywords add licensekey Feature CommandAuthority None Syntax feature Log Authority Admin Firmware Install CommandSyntax firmware install Hardreset Command Syntax Command Help CommandHelp command keyword Keyword Following is an example of the History command History CommandHistory Hotreset Command Hotreset Image Command Ftp Ftp switchname Wait for the unpack to complete Following is an example of the Lip command Lip CommandAdmin session Lip portnumber Passwd Command Syntax passwd accountname Keywords accountname Ipaddress Ping CommandAuthority None Syntax ping Keywords ipaddress Authority None Syntax ps Ps CommandExamples The following is an example of the Ps command Displays current system process information Closes the Telnet session Quit CommandSyntax quit, exit, or logout Syntax reset Reset CommandKeywords config configname Parameter Default SwitchTable A-3. Switch Configuration Defaults System Table A-4. Port Configuration Defaults Arbff Table A-5. Port Threshold Alarm Configuration Defaults Table A-6. Zoning Configuration Defaults Table A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Config option Set CommandKeywords alarm option Syntax set Log option Setup optionSwitch state Pagebreak state Timezone Table A-9. Set Config Port Parameters Set Config CommandSet config Port portnumber Send Arbff True instead of IDLEs False on Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Resource Allocation Timeout Value. The number Table A-11. Set Config Threshold Parameters Threshold Table A-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Edtov Following is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Attributes Archive Set Log CommandSet log Clear Display filter Level filter Port portlist Start Alarms are always logged and always displayed on the screenSave Stop Keywords portnumber Set Port CommandEnable Bypass alpa Disables the port by removing power from the port lasers State state Table A-13. Snmp Configuration Settings Set Setup CommandSet setup Snmp System Table A-14. System Configuration Settings Table A-14. System Configuration Settings Trap Severity Options Following is an example of the Set Setup System command SANbox admin # set setup system Authority None Syntax show Show CommandKeywords about Fdmi portwwn Alarm optionLog option Ns option Displays name server information for all switches and portsLsdb Pagebreak Table A-15. Show Port Parameters Tbuf LIPF8ALPS Post log Steering domainid Table A-16. Switch Operational Parameters Support Displays all connected devices Displays the current time zone settingTopology Users Following is an example of the Show Fdmi command Following is an example of the Show Domains commandFollowing is an example of the Show Fabric command Version Following is an example of the Show Fdmi WWN command Following is an example of the Show NS local domain command Following is an example of the Show NS portID command Following is an example of the Show NS domainID commandFollowing is an example of the Show Interface command Following is an example of the Show Port command PL-XPL-VC-SG3-22 Following is an example of the Show Switch command Following is an example of the Show Topology command SANbox # show topology 1 Local Link Information Following is an example of the Show Version command Show Config Command Show config Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Number of events Show Log CommandShow log Component Displays all critical events Snmp eventsDisplays all informative events Displays all warning events Displays all events related to EPorts Options SettingsLevel Port Following is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Command Syntax shutdown Keywords port portnumber testtype Test CommandSyntax test Status Admin start Command Line Interface Test Command Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime Syntax user User CommandKeywords accounts Following is an example of the User Add command Following is an example of the User Accounts commandFollowing is an example of the User Edit command Following is an example of the User Delete command Following is an example of the User List command Examples The following is an example of the Whoami command Whoami CommandAuthority None Syntax whoami Keywords add zone memberlist Zone CommandSyntax zone Copy zonesource zonedestination Remove zone memberlist Delete zoneMembers zone Rename zoneold zonenew Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zoneset Remove zoneset zonelist DeactivateDelete zoneset Rename zonesetold zonesetnew Following is an example of the Zoneset Zones command Keywords active Zoning CommandOpens a Zoning Edit session Table A-17. Zoning Database Limits LimitsLimit Description 108 59226-00 B Following is an example of the Zoning Limits command E2JBOD2 Following is an example of the Zoning List command Command Line Interface Zoning Command 59226-00 B 111 Command Line Interface Zoning Command 112 59226-00 B Alarm Access Control List ZoneAdministrative State BootP Default Visibility Class 3 ServiceConfigured Zone Sets Fabric Management Switch Maintenance Button Input Power LEDInter-Switch Link Maintenance Mode User Account Soft ZoneTarget World Wide Name WWN Index Index-2 59226-00 B 59226-00 B Index-3 Index-4 59226-00 B 59226-00 B Index-5 Index-6 59226-00 B 59226-00 B Index-7 Index-8 59226-00 B