![](/images/new-backgrounds/1109520/109520429x1.webp)
A
A – Command Line Interface Set Setup Command
The following is an example of the Set Setup System command:
SANbox (admin) #> set setup system |
|
|
| |
A list of attributes with formatting and current values will follow. |
| |||
Enter a new value or simply press the | ENTER key to accept the current value. | |||
If you wish to terminate this process | before reaching the end of the list |
| ||
press 'q' or 'Q' and the ENTER key to | do so. |
|
| |
Eth0NetworkDiscovery | (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) | [Static | ] | |
Eth0NetworkAddress | Address) | [10.0.0.1 | ] | |
Eth0NetworkMask | Address) | [255.255.255.0] | ||
Eth0GatewayAddress | Address) | [10.0.0.254 | ] | |
AdminTimeout | (dec value | [30 | ] | |
InactivityTimeout | (dec value | [0 | ] | |
LocalLogEnabled | (True / False) |
| [True | ] |
RemoteLogEnabled | (True / False) |
| [False | ] |
RemoteLogHostAddress | Address) | [10.0.0.254 | ] | |
NTPClientEnabled | (True / False) |
| [False | ] |
NTPServerAddress | Address) | [10.0.0.254 | ] | |
EmbeddedGUIEnabled | (True / False) |
| [True | ] |
|