A – Command Line Interface Show Command
S
Table | |
|
|
Entry | Description |
|
|
LIP_F8_AL_PS | This LIP denotes a loop failure detected by the L_Port identi- |
| fied by AL_PS. |
LIP_F7_F7 | A loop initialization primitive frame used to acquire a valid |
| AL_PA. |
LIP_F8_F7 | A loop initialization primitive frame used to indicate that a loop |
| failure has been detected at the receiver. |
Link Failures | Number of optical link failures detected by this port. A link fail- |
| ure is a loss of synchronization or a loss of signal while not in |
| the offline state. A loss of signal causes the switch to attempt |
| to |
| failure is counted. A link reset is performed after a link failure. |
Login | Number of device logins |
Logout | Number of device logouts |
LoopTimeouts | A two (2) second timeout as specified by |
LossOfSync | Number of synchronization losses (>100 ms) detected by this |
| port. A loss of synchronization is detected by receipt of an |
| invalid transmission word. |
PrimSeqErrors | Primitive sequence errors detected. |
RxLinkResets | Number of link reset primitives received from an attached |
| device. |
RxOfflineSeq | Number of offline sequences received. An OLS is issued for |
| link initialization, a Receive & Recognize Not_Operational |
| (NOS) state, or to enter the offline state. |
TotalErrors | Total number of errors detected. |
TotalLIPsRecvd | Number of loop initialization primitive frames received by this |
| port. |
TotalLIPsXmitd | Number of loop initialization primitive frames transmitted by |
| this port. |
TotalLinkResets | Total number of link reset primitives. |
TotalOfflineSeq | Total number of Offline Sequences issued and received by |
| this port. |
TotalRxFrames | Total number of frames received by this port. |
TotalRxWords | Total number of words received by this port. |
|
|
|
