Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 59226-00 B manual Arbff

Models: 59226-00 B

1 278

Download 278 pages 48.41 Kb

Page 201

A

A – Command Line Interface Set Config Command

Examples The following is an example of the Set Config Port command:

SANbox #> admin start

SANbox (admin) #> config edit

SANbox (admin-config) #> set config port 1

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

Configuring Port Number: 1

------------------------

AdminState	(1=Online, 2=Offline, 3=Diagnostics, 4=Down)			[Online]
LinkSpeed	(1=1Gb/s, 2=2Gb/s, 4=4Gb/s, A=Auto)			[Auto	]
PortType	(GL /	G	/ F / FL / Donor)	[GL	]
SymPortName	(string, max=32 chars)			[Port1 ]
ALFairness	(True	/	False)	[False	]
DeviceScanEnable (True / False)				[True	]
ForceOfflineRSCN (True / False)				[False ]
ARB_FF	(True	/	False)	[False	]
InteropCredit	(decimal value, 0-255)			[0	]
ExtCredit	(dec value, increments of 7, non-loop only)			[0	]
FANEnable	(True	/	False)	[True	]
AutoPerfTuning (True / False)				[False ]
LCFEnable	(True	/	False)	[False ]
MFSEnable	(True	/	False)	[False ]
VIEnable	(True	/	False)	[False	]
MSEnable	(True	/	False)	[True	]
NoClose	(True	/	False)	[False ]
IOStreamGuard	(Enable		/ Disable / Auto)	[Disable]
PDISCPingEnable (True / False)				[True	]
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config			activate command) before it can take effect.
To discard this configuration use the config cancel command.
SANbox (admin-config)		#>

59226-00 B

A-47

Image 201

Q-Logic 59226-00 B manual Arbff

Contents

SANbox 1400 Series Switch Management User’s Guide Revision B Changes Document Sections Affected Document Revision HistoryTable of Contents Section Managing Fabrics SANbox 1400 Series Switch Management User’s Guide Section Managing SwitchesSection Managing Ports Appendix a Command Line Interface Glossary Index List of Figures List of Tables SANbox 1400 Series Switch Management User’s Guide 59226-00 B Related Materials Intended AudienceJdom License Technical Support AvailabilityTraining Contact Information Using SANsurfer Switch Manager Installing the Management Application Workstation RequirementsWorkstation Requirements SANsurfer Switch Manager For a Windows platformFor a Linux platform SANsurfer Management Suite SMS Installation for WindowsFor a Solaris platform For a Mac OS X platform59226-00 B SMS Installation for Linux Chmod +x sansurferswitchmgrlinuxx.xx.xx.bin SMS Installation for Solaris Install the new SANsurfer Switch Manager package Change directories to the package locationLocate and execute the file sbmoversms.sh Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer commandSANsurfer Switch Manager Window Save Default Fabric View File Dialog Exiting SANsurfer Switch ManagerLoad Default Fabric File Dialog SMS Uninstall Uninstalling SANsurfer Switch ManagerUninstallerData/UninstallSANsurferSwitchManager Standalone UninstallSaving and Opening Fabric View Files Changing the Encryption Key for the Default Fabric View FileSetting SANsurfer Switch Manager Preferences Viewing Software Version and Copyright Information Using Online HelpSANsurfer Switch Manager User Interface Topology DisplayFaceplate Display Topology Display Menu Menu BarsShortcut Keys Faceplate Display MenuTool Bar Tool Bar ButtonsTool Bar Button Description Fabric Tree Fabric TreeWorking Status Indicator Graphic WindowData Window and Tabs 10. Topology Display Using the Topology DisplaySwitch and Link Status Working with Switches and LinksSelecting Switches and Links Opening the Faceplate and Topology Display Popup Menus Arranging Switches in the DisplayTopology Data Windows Port Views and Status Using the Faceplate DisplayWorking with Ports Selecting PortsOpening the Faceplate Popup Menu Faceplate Data Windows Fabric Security User Account SecurityComponents of Fibre Channel fabric security are Enabling Snmp Configuration Fabric ServicesClick the In-band Management Enable button Enabling In-band ManagementSecurity Consistency Checklist Tracking Fabric Firmware and Software VersionsSaving a Version Snapshot Viewing and Comparing Version Snapshots Exporting Version Snapshots to a FileManaging the Fabric Database Add a New Fabric Dialog Adding a FabricOpening a Fabric View File Removing a FabricSaving a Fabric View File Rediscovering a FabricAdding a New Switch to a Fabric Deleting Switches and LinksReplacing a Failed Switch Fabric Status Displaying Fabric InformationSwitch Icon Description Topology Display Switch and Status IconsEvents Browser Displaying the Event BrowserSeverity Levels Discarded when you close a SANsurfer Switch Manager sessionEditor or browser Severity Description IconFilter Events Dialog Filtering the Event BrowserSaving the Event Browser to a File Sorting the Event BrowserDevices Data Window Devices Data Window EntriesEntry Description Active Zone Set Data Window Active Zone Set Data WindowLink Data Window SANsurfer Switch Manager enables you to do the followingWorking with Device Information and Nicknames Displaying Detailed Device InformationExporting Device Information to a File Managing Device Port NicknamesCreating a Nickname Editing a Nickname Deleting a NicknameExporting Nicknames to a File Importing a Nicknames File Zoning a FabricZoning Concepts Soft Zones ZonesAccess Control List Hard Zones AliasesZone Sets Zoning Database Using the Zoning Wizard Managing the Zoning DatabaseManaging the zoning database consists of the following Edit Zoning Dialog Editing the Zoning DatabaseManaging Fabrics Zoning a Fabric Edit Zoning Dialog Tool Bar Buttons and Icons Interop Auto Save Configuring the Zoning DatabaseDiscard Inactive Default VisibilitySaving the Zoning Database to a File Restoring the Zoning Database from a FileRemoving All Zoning Definitions Restoring the Default Zoning DatabaseCreating a Zone Set Managing Zone SetsActivating and Deactivating a Zone Set Copying a Zone to a Zone SetRemoving a Zone from a Zone Set or from All Zone Sets Removing a Zone Set Managing ZonesManaging zones involves the following Creating a Zone in a Zone Set Adding Zone Members Removing a Zone Member Renaming a Zone or a Zone SetRemoving a Zone from a Zone Set Removing a Zone from All Zone SetsChanging Zone Types Managing AliasesCreating an Alias Removing an Alias from All Zones Adding a Member to an AliasZone Merge Failure Merging Fabrics and ZoningZone Merge Failure Recovery Managing Switches Account Name Password Admin Authority Expiration Managing User AccountsFactory User Accounts Creating User Accounts User Account Administration Dialog Add AccountRemoving a User Account User Account Administration Dialog Remove AccountUser Account Administration Dialog Change Password Changing a User Account PasswordModifying a User Account User Account Administration Dialog Modify AccountFaceplate Display Switch Information Displaying Switch InformationSwitch Data Window Entries Switch Data WindowRatov Switch Data Window Entries Port Information Data Window Port Statistics Data WindowConfigured Zonesets Data Window Configured Zonesets Data WindowPort Threshold Alarm Configuration Dialog Configuring Port Threshold AlarmsPort Threshold Alarm Example Paging a SwitchResetting a Switch Setting the Date/Time and Enabling NTP ClientType Description Switch ResetsUsing the Configuration Wizard Configuring a SwitchSymbolic Name Switch PropertiesSwitch Administrative States Switch Administrative StatesParameter Description Fabric Device Management Interface Domain ID and Domain ID LockIn-band Management Broadcast Support10. Advanced Switch Properties Dialog Advanced Switch PropertiesTimeout Values Timeout ValuesLegacy Port Address Format Interop Mode for Zoning11. Network Properties Dialog Network PropertiesIP Configuration Parameters IP ConfigurationNTP Client Remote Logging12. Snmp Properties Dialog Snmp PropertiesSnmp Configuration Parameters Snmp ConfigurationSnmp Trap Configuration Parameters Snmp Trap ConfigurationArchiving a Switch 13. Restore Dialogs Full and Selective Restoring a SwitchManaging Switches Restoring a Switch Restoring the Factory Default Configuration Factory Default Configuration SettingsSetting Value Downloading a Support File Installing Firmware 14. Hardware Status LEDs Displaying Hardware StatusManaging Switches Displaying Hardware Status 59226-00 B Displaying Port Information Managing PortsDisplaying Port Types Monitoring Port StatusPort Types State DescriptionDisplaying Port Speeds Displaying Port Operational StatesPort Operational States Port SpeedsDisplaying Transceiver Media Status Port Transceiver Media ViewMedia Icon Description Port Statistics Data Window Entries LIP ALPD,ALPS Entry Description Port Address Port Fibre Channel address Port Information Data Window EntriesPort Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring PortsPort Administrative States Changing Port Administrative StatesChanging Port Speeds Changing Port Types Changing Port Symbolic Name Stream GuardDevice Scan Designate Donor Ports Using the Extended Credits WizardTesting Ports Resetting a PortManaging Ports Testing Ports Performance View Graphs Graphing Port PerformanceStarting SANsurfer Performance View This section describes how to do the followingExiting SANsurfer Performance View Save Default Performance View File DialogSaving and Opening Performance View Files Load Default View File DialogSetting SANsurfer Performance View Preferences Changing the Default Performance View File Encryption KeyDisplaying Graphs for a Switch Setting the Polling FrequencyCustomizing Graphs Arranging Graphs in the DisplayDefault Graph Options Dialog Rescaling a Selected Graph Setting Global Graph TypeSaving Graph Statistics to a File Printing GraphsManaging Ports Graphing Port Performance 59226-00 B Logging On to a Switch Command Line InterfaceUser Accounts Working with Switch ConfigurationsModifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Commands Table A-1. Command-Line CompletionKeystroke Effect Table A-2. Commands Listed by Authority Level Monitoring Commands Configuration CommandAdmin Session Commands Authority Admin CommandSyntax KeywordsSyntax alias Alias CommandKeywords add alias memberlist Copy aliassource aliasdestinationList Delete aliasMembers alias Remove alias memberlistConfig Command Syntax configKeywords activate configname Edit configname RestoreSave configname # ftp symbolicname or ipaddress Create Support Command Authority NoneSyntax create support Local directory now /itasca/conf/images bin Date Command Syntax dateKeywords MMDDhhmmCCYY Authority None Syntax feature Feature CommandKeywords add licensekey LogFirmware Install Command Authority AdminSyntax firmware install Syntax Hardreset CommandHelp command keyword Help CommandCommand KeywordHistory Command Following is an example of the History commandHistory Hotreset Hotreset CommandImage Command Ftp Ftp switchname Wait for the unpack to complete Admin session Lip CommandFollowing is an example of the Lip command Lip portnumberSyntax passwd accountname Keywords accountname Passwd CommandAuthority None Syntax ping Ping CommandIpaddress Keywords ipaddressExamples The following is an example of the Ps command Ps CommandAuthority None Syntax ps Displays current system process informationQuit Command Closes the Telnet sessionSyntax quit, exit, or logout Reset Command Syntax resetKeywords config configname Table A-3. Switch Configuration Defaults SwitchParameter Default SystemArbff Table A-4. Port Configuration DefaultsTable A-5. Port Threshold Alarm Configuration Defaults Table A-7. Snmp Configuration Defaults Table A-6. Zoning Configuration DefaultsTable A-8. System Configuration Defaults Keywords alarm option Set CommandConfig option Syntax setSwitch state Setup optionLog option Pagebreak stateTimezone Set config Set Config CommandTable A-9. Set Config Port Parameters Port portnumberSend Arbff True instead of IDLEs False on Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Resource Allocation Timeout Value. The number Threshold Table A-11. Set Config Threshold ParametersTable A-12. Set Config Zoning Parameters Arbff Edtov Following is an example of the Set Config Switch commandFollowing is an example of the Set Config Threshold command Attributes Following is an example of the Set Config Zoning commandSet log Set Log CommandArchive ClearDisplay filter Port portlist Level filterSave Alarms are always logged and always displayed on the screenStart StopEnable Set Port CommandKeywords portnumber Bypass alpaState state Disables the port by removing power from the port lasersSet setup Set Setup CommandTable A-13. Snmp Configuration Settings Snmp SystemTable A-14. System Configuration Settings Table A-14. System Configuration Settings Trap Severity Options SANbox admin # set setup system Following is an example of the Set Setup System commandShow Command Authority None Syntax showKeywords about Alarm option Fdmi portwwnLog option Lsdb Displays name server information for all switches and portsNs option PagebreakTbuf Table A-15. Show Port ParametersLIPF8ALPS Steering domainid Post logSupport Table A-16. Switch Operational ParametersTopology Displays the current time zone settingDisplays all connected devices UsersFollowing is an example of the Show Fabric command Following is an example of the Show Domains commandFollowing is an example of the Show Fdmi command VersionFollowing is an example of the Show NS local domain command Following is an example of the Show Fdmi WWN commandFollowing is an example of the Show NS domainID command Following is an example of the Show NS portID commandFollowing is an example of the Show Interface command PL-XPL-VC-SG3-22 Following is an example of the Show Port commandFollowing is an example of the Show Topology command Following is an example of the Show Switch commandSANbox # show topology 1 Local Link Information Following is an example of the Show Version command Show config Show Config CommandFollowing is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show log Show Log CommandNumber of events ComponentDisplays all informative events Displays all warning events Snmp eventsDisplays all critical events Displays all events related to EPortsLevel SettingsOptions PortFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show Setup Command Show setupMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Syntax shutdown Shutdown CommandSyntax test Test CommandKeywords port portnumber testtype StatusAdmin start Command Line Interface Test Command Uptime Command Examples The following is an example of the Uptime commandAuthority None Syntax uptime User Command Syntax userKeywords accounts Following is an example of the User Accounts command Following is an example of the User Add commandFollowing is an example of the User Edit command Following is an example of the User List command Following is an example of the User Delete commandWhoami Command Examples The following is an example of the Whoami commandAuthority None Syntax whoami Syntax zone Zone CommandKeywords add zone memberlist Copy zonesource zonedestinationMembers zone Delete zoneRemove zone memberlist Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset CommandDelete zoneset DeactivateRemove zoneset zonelist Rename zonesetold zonesetnewFollowing is an example of the Zoneset Zones command Zoning Command Keywords activeOpens a Zoning Edit session Limits Table A-17. Zoning Database LimitsLimit Description 108 59226-00 B E2JBOD2 Following is an example of the Zoning Limits commandFollowing is an example of the Zoning List command Command Line Interface Zoning Command 59226-00 B 111 Command Line Interface Zoning Command 112 59226-00 B Administrative State Access Control List ZoneAlarm BootPConfigured Zone Sets Class 3 ServiceDefault Visibility Fabric Management SwitchInter-Switch Link Input Power LEDMaintenance Button Maintenance ModeTarget Soft ZoneUser Account World Wide Name WWNIndex Index-2 59226-00 B 59226-00 B Index-3 Index-4 59226-00 B 59226-00 B Index-5 Index-6 59226-00 B 59226-00 B Index-7 Index-8 59226-00 B