A – Command Line Interface Show Command
S
version
Displays an introductory set of information about operational attributes of the switch. This keyword is equivalent to the About keyword.
Examples The following is an example of the Show Chassis command:
SANbox #> show chassis |
|
Chassis Information |
|
| |
BoardTemp (1) - Degrees Celsius | 23 |
PowerSupplyStatus (1) | Good |
HeartBeatCode | 1 |
HeartBeatStatus | Normal |
The following is an example of the Show Domains command:
SANbox #> show | domains |
| |
Principal switch | is (remote): 10:00:00:60:69:50:0b:6c | ||
Upstream Principal ISL is | : 1 | ||
Domain ID List: |
|
| |
Domain | 97 | (0x61) | WWN = 10:00:00:c0:dd:00:71:ed |
Domain | 103 | (0x67) | WWN = 10:00:00:60:69:50:0b:6c |
The following is an example of the Show Fabric command:
SANbox #> show fabric
Domain | WWN | Enet IP Addr | FC IP Addr | SymbolicName | |
16 | (0x10) | 10:00:00:c0:dd:00:77:81 | 10.20.68.11 | 0.0.0.0 | gui sb1 .11 |
17 | (0x11) | 10:00:00:c0:dd:00:6a:2d | 10.20.68.12 | 0.0.0.0 | sw12 |
The following is an example of the Show FDMI command:
SANbox #> show fdmi
HBA ID | PortID | Manufacturer | Model | Ports | |
21:01:00:e0:8b:27:aa:bc 610000 | QLogic | Corporation | QLA2342 | 2 | |
21:00:00:00:ca:25:9b:96 180100 | QLogic | Corporation | QL2330 | 2 | |
|
