RGB Spectrum manual DGy 201 Streaming Commands Arguments Description, Sendstream, Stopsend

C O M M A N D L I N E I N T E R F A C

.E

		.
		Command Summary
		. . .
Table 6-11.DGy 201 Streaming Commands
Command	Arguments	Description
SENDSTREAM	[-I clipname]	This command transmits a compressed JPEG 2000
	[-P portnumber]	stream over a TCP connection to a remote client.
		The source of the stream can either be real time
		encoding of the signal connected to the DGy input
		or the replay of an existing clip.
		To stream a live encoding of the input signal omit
		the -I option.
		Example
		Stream a compressed form of the input stream to
		port 8001 of the target player.
		SENDSTREAM -P 8001
		To stream an existing clip enter the clipname
		explicitly using the -I argument. When a ports is
		explicitly specified, the port number is saved and
		used as the default port number for subsequent
		SENDSTREAM commands
		Example
		Stream the recorded clip “greatclip” to the default
		port (8001) of the target player.
		SENDSTREAM -I greatclip
		To terminate streaming, see STOPSEND
		Factory default port setting: 8001
STOPSEND	(none)	Terminates a stream started with the
		SENDSTREAM command. To terminate
		streaming, issue STOPSEND followed by the
		STOP command.
		See also SENDSTREAM.
StreamSTATus	(none)	Returns the streaming state of the system
		(“Connected” or “Not connected”).
		After a connection has been made with a client, this
		command will report “Connected” until the user
		issues the DGy command to terminate the stream,
		even if the client has terminated its end of the
		connection.

350-8697 DGy Model 201 User Guide 111