RGB Spectrum 201 manual Unprotectclip, Mkdir, Pwd

C O M M A N D L I N E I N T E R F A C

.E

		.
		Command Summary
		. . .
Table 6-12.Files System Commands(Continued)
UNPROTECTCLIP	<clipname>	Removes write protection from named clip.
		Clipname can contain Unix style wild cards,
		and may be used to specify multiple clips.
RealTimeSeek	<yyyymmddhhmmss[xxx]	The RealTimeSeek command cues the DGy to
	>	the specified real time recording time within the
		current clip. The time argument can be
		provided with resolution in seconds, or in
		milliseconds by adding the final three digits
		(xxx) at the end of the RealTimeSeek
		argument.
TimeCodeQuery	[F H]	The TCQ command returns the timecode of
		the current clip position. This command is valid
		in PLAY or PLAY PAUSE modes only. When
		used with the F argument, the TCQ command
		returns the relative frame number. When used
		with the H argument the TCQ command
		returns the time code with resolution in
		milliseconds.
CD	<dirname>	Changes to a new directory on the current
		drive. Relative or absolute pathnames are
		allowed.
		The path name to the removable disk is /
		remov/
		The path name to the (optional) fixed disk is /
		fixed/
		Use the PWD command to report your current
		directory and drive
		Example:
		If you are currently using the fixed drive and
		wish to change to the directory “myclips” on the
		removable drive use the following command:
		cd /remov/myclips
DELeteDIR	<dirname>	Removes the named (empty) directory.
		Relative or absolute pathnames are allowed.
MKDIR	<dirname>	Makes a new directory. Relative or absolute
		pathnames are allowed.
		Example:
		Create the directory “myclips”
		mkdir myclips
PWD	(none)	Gives the absolute path of the current
		directory.
CHecKFIXEDDISK	(none)	Executes a utility to detect and repair file
		problems on the optional fixed disk.
CHecKREMOVABLEDIS	(none	Executes a utility to detect and repair file
K		problems on the removable disk.

350-8697 DGy Model 201 User Guide 115