TECHNICAL SPECIFICATIONS
Connectors and Pinouts
350-8697 DGy Model 201 User Guide 133
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONNECTORS AND PINOUTSThis section provides information about the signal and control
connectors used in DGy 201.
•DVI-I Connector
•Composite Video Connector
•Ethernet Connector
•RS-232 Connector
. . . . . . . . .
DVI-I CONNECTOR The DVI connector is used to interconnect graphics devices. This is a
standard connector based on the work of the Digital Display Working
Group (DDWG).
CONNECTOR TYPE AND PINOUTS
The connector used in the DGy 201 is a 29-pin DVI-I connector,
supporting both analog and digital signals. The DVI-I connector (as
shown below) is used for the standard DGy 201 DVI input and output
signals.
Figure A-16. DVI-I Digital/Analog Connector (viewed from rear of
chassis)
The 29 pin DVI-I connector (Molex #74320) has the following pin
assignments:
Tabl e A-1 . DVI-I Connector Pinout
Pin Signal Description
1TMDS Data 2-
2TMDS Data 2+
3TMDS Data 2/4 shield
4NC Defined for Dual Link only
5NC Defined for Dual Link only
6DDC Clock