RGB Spectrum 201 PREVMARK, STMARK

COMMAND LINE INTERFACE
Command Summary
350-8697 DGy Model 201 User Guide 109
. . . . .
PREVMARK (none) The PREVMARK command sends the recorder to
the previous event mark from the current position,
and cues there. To play from that spot you must
issue a PLAY or Pause command.
PREVMARK will only seek within the current clip,
and will not wrap.
SeekToMARK <mark number |
description>
The STMARK command sends the recorder to the
specified event mark, and cues there. To play from
that spot you must issue a PLAY or Pause
command.
STMARK will only seek within the current clip.
TimeCodeQuery [H | F] Returns the timecode at the current disk position.
Only valid in PLAY or PAUSE modes.
When used without an argument, the
TimeCodeQuery command returns the time in the
format yyyymmddhhmmss.
When used with the optional H argument, the
TimeCodeQuery returns the replay timecode with
resolution in milliseconds with the format
yyyymmddhhmmssxxx where the final three digits
(xxx) represent the fractional time in milliseconds.
When used with the optional F argument, the
TimeCodeQuery command returns the replay
timecode using the frame number. The first frame in
a file is identified as frame 0. Note that a clip may
consist of multiple files and that the maximum file
size is approximately 1.8 GB. This command option
is typically used for debug only.
Table 6-10. DGy 201 Play and Record Commands (Continued)
Command Arguments Description