INSTALLATION AND SET UP
Web Control Panel Connection
350-8697 DGy Model 201 User Guide 22
. . . . .
(Figure 2-5) together with the standard WCP Player Screen (Figure 2-
6).
Figure 2-5. WCP Configuration Screen
The WCP Configuration Screen provides information about the
configuration of your DGy 201 in addition to two control buttons.
•Simultaneous Mode
By default, when you launch WCP, the standard WCP Player
Control panel is launched. If your DGy 201 is equipped with the
optional Simultaneous Mode option then the Simultaneous
Mode button should be used to select the WCP Simultaneous
Record/Play control panel. If the option is not installed then this
button will be greyed out.
•Terminal
Click on the Term ina l button to launch the Terminal page. This
page can be used to issue commands using the DGy 201 ASCII
command protocol. See Chapter 6, Command Line Interface
for information on these commands. This feature is useful if you
want to enable the Command Log to make or debug commands
from an external controller.
When the WCP Configuration Screen opens, the default WCP Player