RGB Spectrum 201 Output Commands Arguments Description GAMma, OutPutTiMingLOAD, OutPutTiMingNAME

C O M M A N D L I N E I N T E R F A C

.E

		.
		Command Summary
		. . .
	O U T P U T C O M M A N D S D E S C R I P T I O N S
	The table below lists all DGy 201 output commands, their arguments
	and detailed descriptions.
Table 6-8.Output Commands
Command	Arguments	Description
GAMma	<0.5...2.0>	Sets the playback gamma.
		Factory default: 1.0
OUTPUT	(none)	A query command which returns information on the
		current output timing.
OutPutTiMingLOAD	<1..160>	Sets the output raster to the timing selected from
		the Timing List. In order to load the output timing
		parameters the DGy 201 must be in the Free Run
		mode.
		(see OutputMode )
		Refer to the “Factory Timing List” section for
		details.
OutPutTiMingNAME	<name>	Assigns a name to the current output timing. The
		argument can be up to 23 alphanumeric characters
		with no spaces (underscore is acceptable).
OutPutTiMingSAVE	<100..160>	Saves the timing data of the current output raster
		into the Timing List. The argument specifies which
		Timing List position is used.
		If OutPutTiMingSAVE is issued for an already
		occupied position, the DGy requests overwrite
		confirmation.
		Refer to the “Factory Timing List” section for
		additional details.
OutPutTiMing	<hfp> <hs> <hbp>	Sets the timing for the current output.
	<hact> <vfp> <vs>
	<vbp> <vact> <hfreq>
	<sync> <hpol> <vpol>
	<il>
OutPutTiMing	<HFP HS HBP	Changes (or reports) one parameter of the current
(Alternate)	HACT VFP VS VBP	output timing.
	VACT HFREQ SYNC
	HPOL VPOL
	IL>[<value>]

350-8697 DGy Model 201 User Guide 101