RGB Spectrum 201 manual Mount, Example, Umount

C O M M A N D L I N E I N T E R F A C

.E

		.
		Command Summary
		. . .
Table 6-12.Files System Commands(Continued)
MOUNT	<ipaddress:sharename>	This DGy 201 optional feature supports the
		ability to mount an external network mapped
		disk drive. Note that this capability requires the
		use of Linux or an Allegro network file server
		software for the Windows OS.
		The MOUNT command provides the ability to
		set up a network mapped NFS remote disk
		drive that DGy can use to store and recall
		recordings. The location of the remote drive is
		identified by the network address (ipaddress)
		and sharename is the name of the shared
		drive as configured in the NFS server on the
		remote host (note that the syntax of this name
		may differ with different NFS servers). The
		local mount point is always on the DGy 201 /
		mnt/mp1
		It is recommended that you consult with your
		IT manager before executing the mounting
		procedure.
		Example:
		To mount the /usr/dgy NFS share on a Linux
		host at IP node 192.168.1.123, issue the
		following:
		mount 192.168.1.123:/usr/dgy
		Once the disk is mounted the drive will be
		identified in the Clip Browser as \remot.
		To record, play or list clips on the remote drive
		execute the command CD/rgb/mp1 followed by
		the desired clip command (PLAY, RECORD
		...).
		The settings associated with the remote drive
		are saved in non-volatile memory, and the DGy
		will automatically attempt to reconnect after a
		reboot. To select a new remote drive you must
		first unmount the current drive (see the
		UMOUNT command for details).
		NOTE: After mounting a drive verify that the
		drive is mounted can be accomplished using
		the VOLINFO command (see VOLumeINFO
		for details).
UMOUNT	(none)	The UMOUNT command will unmount the
		current remote drive. Requires the optional
		disk mount feature. See also MOUNT

350-8697 DGy Model 201 User Guide 117