RGB Spectrum 201 manual Playloop, Playspd, Pause, Stop

C O M M A N D L I N E I N T E R F A C

.E

		.
		Command Summary
		. . .
Table 6-10.DGy 201 Play and Record Commands (Continued)
Command	Arguments	Description
SYNChronizedSTOP	(none)	This command modifies the behavior of PLAY. If
		PLAYLOOP is OFF then PLAY plays its clip (or
		list of clips) once, then stops. If PLAYLOOP is
		ON, PLAY plays the listed clip(s) in a loop until
		STOP is issued.
		Factory default: OFF
PLAYLOOP	<ON OFF>	List information about any queued synchronized
		command. See SYNChronizedPLAY and
		SYNChronizedRECord.
PLAYSPeeD	[-100.0 ... 100.0 ]	This command sets the DGy 201 play speed.
		PLAYSPeeD = 1.0 represents normal speed in the
		forward direction.
		Positive PLAYSPeeD values represent playback in
		the forward direction.
		To play in fast forward use a positive value of
		PLAYSPeeD greater than 1.0
		To play in slow motion, use a positive value
		between 1.0 and 0.0
		Negative PLAYSPeeD values represent playback
		in reverse.
		To play in fast reverse use a negative value greater
		than -1.0
		To play in slow reverse use a negative value
		between -1.0. and 0.0.
		Example: Set the play speed for 8 times normal in
		the reverse direction.
		PLAYSPD -8.0
		Example: Set the play speed for 1/10 normal
		speed in the forward direction.
		PLAYSPD 0.1
		Default: 1.0
PAUSE	(none)	In Playback mode, this command (with no
		argument) pauses playback. Playback resumes
		when you send the Play command.
		In Record mode, this command (with no argument)
		pauses record. Record resumes when you sent the
		Record command.
FrameNext	(none)	Advances to the next frame of a paused clip
FramePrevious	(none)	Setps back to the pervious frame of a paused clip
STOP	(none)	This command cancels the Play, Pause, and
		Record recorder functions.

350-8697 DGy Model 201 User Guide 107