Nortel Networks NN47200-503 manual Ip rip holddown command, Ip rip in-policy command

72IP Routing Configuration and Management

ip rip holddown command

The ip rip holddown command is used to set the value of the holddown timer on the RIP interface.

The syntax of the ip rip holddown command is:

ip rip holddown <timer_value>

The <timer_value> parameter is an integer value between 0 and 360 seconds.

The ip rip holddown command is executed in the Interface

Configuration mode.

ip rip in-policy command

The ip rip in-policycommand is used to add an in policy to this RIP interface.

The syntax of the ip rip in-policycommand is:

ip rip in-policy <policy_name>

The <policy_name> parameter represents the name of a previously configured switch policy.

The ip rip in-policycommand is executed in the Interface

Configuration mode.

no ip rip in-policy command

The no ip rip in-policycommand is used to remove a in policy for the RIP interface.

The syntax of the no ip rip in-policycommand is:

no ip rip in-policy <policy_name>

The <policy_name> parameter represents the name of a previously configured switch policy.

The no ip rip in-policycommand is executed in the Interface

Configuration mode.

ip rip listen command

The ip rip listen command is used to allow this interface to listen for RIP advertisements.

The syntax of the ip rip listen command is:

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks