Nortel Networks NN47200-503 manual No ip vrrp address command, Ip vrrp action command

106IP Routing Configuration and Management

The ip vrrp address command is executed in the Interface

Configuration mode.

no ip vrrp address command

The no ip vrrp address command is used to delete the association of an IP address with a virtual router ID.

The syntax of the no ip vrrp address command is:

no ip vrrp address <vr_id> <ip_address>

The <vr_id> parameter represents the virtual router being configured. This is a value between 1 and 255. The <ip_address> parameter represents the address to be used in the association.

The no ip vrrp address command is executed in the Interface

Configuration mode.

ip vrrp action command

The ip vrrp action command is used to define the action this interface will take when a holddown timer threshold has been reached.

The syntax of the ip vrrp action command is:

ip vrrp action <vr_id> {none preempt}

The <vr_id> parameter represents the virtual router being configured. If none is selected as the action, no action is taken when a holddown timer threshold is reached. If preempt is selected as the action, the holddown timer is cancelled.

The ip vrrp action command is executed in the Interface Configuration mode.

ip vrrp adver-int command

The ip vrrp adver-intcommand is used to set the VRRP advertisement interval.

The syntax of the ip vrrp adver-intcommand is:

ip vrrp <vr_id> adver-int <interval>

The <vr_id> parameter represents the virtual router being configured. The <interval> parameter represents the advertisement interval in seconds. This is an integer value between 1 and 255.

The ip vrrp adver-intcommand is executed in the Interface

Configuration mode.

Nortel Ethernet Routing Switch 5500 Series

Configuration-IP Routing Protocols

NN47200-503 03.01 Standard

5.127 August 2007

Copyright © 2005-2007, Nortel Networks