About Your KAMELEON 5

Learning feature

The KAMELEON 5 comes equipped with the unique “learning feature”, which means that you can copy almost any function (max. ± 50) from your original (working) remote control onto your new KAMELEON 5 (See “Learning Feature” on page 15). This comes in handy, when after having setup your KAMELEON 5 you may find that some functions from your original remote are missing on your KAMELEON 5 key pad.

Macros (sequence of commands)

Your KAMELEON 5 comes with an easy-to-use Macro feature, allowing you to send several commands with the press of a single key (for example turning a few devices on or off).

Once you programmed a macro on one of these keys, the sequence will be per- formed in every mode.

Code upgrade technology

Your ONE FOR ALL KAMELEON 5 also offers a Code upgrade technology. This technology gives you the possibility to add codes to the memory. If your device uses a particular code which is not found in the KAMELEON 5 memory (using the “Direct code set up” on page 12 or the “Search Method” on page

13)you may use the ”Code Upgrade Technology” (see page 24). Thanks to this technology your KAMELEON 5 will never become obsolete.

Batteries

Note: when inserting the batteries the KAMELEON 5 will be in “demo-mode (showing several screens). The KAMELEON 5 will go out of demo-mode automatically as you set it up.

Your KAMELEON 5 requires 2 AA/LR6 alkaline batteries.

1.Unscrew the battery door using a coin.

2.Insert the batteries with the positive end (+) upwards.

3.Replace the battery door back into position.

Low Voltage Indicator

As soon as the batteries run out of power the KAMELEON 5 will indicate this. The IR indicator will flash 5 times whenever you press a key and you cannot access programming mode.

Please make sure to replace the batteries with 2 new AA/LR6 alkaline batteries.

WWW. ONEFORALL.COM

3

Page 4
Image 4
One for All URC-8305 warranty Batteries, Learning feature, Macros sequence of commands, Code upgrade technology