One for All URC-8305 warranty Device Sleeptimer, Kameleon 5 Timer

Extra Features

Device Sleeptimer

If your device has a “Sleeptimer” function built in, you can access this function with your KAMELEON 5 remote. To do so:

1.Make sure your device is switched on.

2.Press the device key TV (or DVD, SAT, AUD).

3.Point the KAMELEON 5 at your device and press and release the MAGIC key then press POWER. You should see the Sleeptimer activate on your device. To increase the timer, simply press POWER again (within 10 seconds) until the timer gets to the desired time.

-To deactivate the “Sleeptimer”, repeat steps 1 – 3 above. During step 3, continue pressing POWER again (within 10 seconds) until the timer indicates zero minutes.

-Depending on how you used sleeptimer on the original remote, you might need to access sleeptimer in a different way (through menu for example).

KAMELEON 5 - Timer

The KAMELEON 5 – Timer function allows you to activate a <desired function> from a specific <device mode> within a <specific amount of minutes> (max. amount of timer is 60 minutes).

-The <desired function> can be an existing function within a specific mode, a Macro, a Key Magic function or a Learned function.

Example: you want your TV to switch off after 45 minutes.

1.Press and hold the MAGIC key for about 3 seconds. The screen will change to the setup screen.

2.Press OTHER.

3.Press 9 8 5 to enter the KAMELEON 5 –Timer programming mode. The animated IR Indicator will blink twice.

4.Press TV to select the mode where the KAMELEON 5 – Timer function will come from. The animated IR Indicator will blink twice.

5.Press the POWER key to select the desired function. The animated IR Indicator will blink twice.

6.Now press 4 5 to enter the amount of minutes after which the <Desired function> needs to be activated (e.g. for 5 min. press 05, max. up to 60).

7.Press ENTER. The animated IR Indicator will blink twice and the KAMELEON 5– Timer function will be activated.

-Invalid key presses during the programming of KAMELEON 5 - Timer will be ignored.

-The <Desired function> can be any key except for Device keys, SCROLL, ESC, ENTER and MAGIC.

-While the KAMELEON 5 – Timer is running, the IR animation will light every 15 seconds.

-The KAMELEON 5 –Timer function is cancelled by setting up a new KAMELEON 5 – Timer function.

-If no key is pressed while setting up a KAMELEON 5 – Timer function, the remote will return to user mode after 30 seconds.

-The SCROLL key can be accessed any time during programming if applicable in the current device mode.

WWW. ONEFORALL.COM 21